Shimadzu UW-2200H [107/129] Overview

15. Connecting Peripheral Instruments

Read Chapter 7 Before Use of These Pages

15.3 Communication Setting

15.3.1 Overview

This menu is used to set the specifications for communication between the balance and a personal

computer or electronic printer.

15.3.2 Handshaking

Handshaking determines whether the peripheral equipment can receive communication data from the

balance. This function does not relay the status of the balance to the peripheral equipment.

The balance is able to receive as long as there is space in the receiving buffer of the balance. This

function operates once “oFF” is displayed, operation in other states is not guaranteed.

When the balance output is retained by handshaking, the display of the balance is locked. Determine

the specifications for handshaking.

To have software handshaking not performed, select menu item .

To have software handshaking performed as the following, select menu item .

After the balance receives X-OFF (13H), the balance output is retained.

After the balance receives X-ON (11H), the balance output is initiated.

To have hardware handshaking performed as the following, select menu item .

When DTR is OFF, the output from the balance is retained.

When DTR is ON, the output from the balance is initiated.

To have timed hardware handshaking performed, select menu item .

Notes

• This menu affects both the RS-232C and DATA I/O at the same time.

For the instrument to be connected to the DATA I/O connector such as

an electronic printer, select the communication setting of the balance to

the default settings, which are menu items , , , , , .

However, select WindowsDirect setting (6.2.1) and follow the manual of

the electronic printer when using EP-80 or EP-50WIN Electronic Printer

simultaneously with WindowsDirect.

• When WindowsDirect function is set by the procedure described in

6.2.1, the communication settings are the same as selecting menu items

, , , , , .

76 77 83 89 92 94

74 77 81 89 92 97