Husqvarna LB 348V [75/278] Operating

Husqvarna LB 348V [75/278] Operating
English – 75
OPERATING
Work area safety
Branches, twigs, stones, etc. should be removed from the
lawn before you start to mow.
Objects hitting against the cutting attachment could be
thro
wn and cause damage to people and objects. Keep
people and animals well away.
Do not use the machine in bad weather, such as dense
f
og, heavy rain, strong wind, intense cold, etc. Working in
bad weather is tiring and can lead to dangerous
conditions, e.g. slippery surfaces.
Observe your surroundings to ensure that nothing can
aff
ect your control of the machine.
Beware of roots, stones, twigs, pits, ditches etc. Tall grass
can hide obstacles
.
Mowing slopes can be dangerous. Do not use the lawn
mo
wer on very steep slopes. The lawn mower should not
be used on inclines greater than 15 degrees.
On sloping ground you should work along the slope. It is
m
uch easier to work along a slope than it is to work up and
down it.
Be careful when you are approaching hidden corners and
objects that could b
lock your view.
Work safety
A lawn mower is only designed to mow lawns. All other
use is forbidden.
Wear personal protective equipment. See instructions
under the ”P
ersonal protective equipment” heading.
Do not start a lawn mower unless the cutter and all covers
are fitted correctly
. Otherwise the cutter could come loose
and cause personal injuries.
Make sure the cutter does not hit foreign objects such as
stones
, roots or the like. This can make the cutter dull and
bend the engine shaft. A bent axle gives imbalance and
heavy vibration, which results in a great risk of the cutter
becoming loose.
The brake handle must never be permanently anchored in
handle when the machine is r
unning.
Place the lawn mower on firm, flat surface and start it.
Mak
e sure that the cutter cannot come into contact with
the ground or other objects.
Always place yourself behind the machine. Allow all the
wheels to remain on the g
round and keep both hands on
the handle when mowing. Keep your hands and feet away
from the rotating blades.
Do not tilt the machine when the engine is running. Never
r
un with the machine when it is running. You should
always walk with the lawn mower.
Pay particular attention when pulling the machine towards
y
ou during work.
Never lift up the lawn mower or carry it around when the
engine is r
unning. If you must lift the lawn mower, first
switch off the engine and disconnect the ignition lead from
the spark plug.
The engine should be switched off when moving over
g
round that is not to be mowed. For example, gravel
paths, stone, shingle, asphalt, etc.
Never run with the machine when it is running. You should
alw
ays walk with the lawn mower.
Shut down the engine before changing the cutting height.
Ne
ver make adjustments with the engine running.
Never leave the machine unsupervised with the motor
r
unning. Turn off the motor. Ensure the cutting attachment
has stopped rotating.
If any foreign object is hit or if vibrations occur stop the
machine immediately
. Disconnect the HT lead from the
spark plug. Check that the machine is not damaged.
Repair any damage.
Basic working techniques
Always cut with a sharp blade for optimal results. A dull
blade gives an uneven cut and the grass becomes yellow
on the surface of the cut.
Never mow more than 1/3 of the length of the grass. This
especially applies dur
ing dry periods. Mow first with the
cutting height set high. Then check the result and lower to
an appropriate height. If the grass is really long, drive
slowly and mow twice if necessary.
Cut in different directions each time in order to avoid
str
ipes in the lawn.
Before pulling the machine towards you, disengage the
dr
ive and push the machine forward approx. 10 cm.
Make sure to disengage the drive when approaching an
obstacle
.
Transport and storage
Secure the equipment during transportation in order to
avoid transport damage and accidents.
Store the equipment in a lockable area so that it is out of
reach of children and unauthor
ized persons.
Store the machine and its equipment in a dry and frost
proof place
.
For transport and storage of fuel, see the section "Fuel
handling".

Содержание

Похожие устройства

OPERATING Work area safety Branches twigs stones etc should be removed from the lawn before you start to mow Objects hitting against the cutting attachment could be thrown and cause damage to people and objects Keep people and animals well away Do not use the machine in bad weather such as dense fog heavy rain strong wind intense cold etc Working in bad weather is tiring and can lead to dangerous conditions e g slippery surfaces Observe your surroundings to ensure that nothing can affect your control of the machine Beware of roots stones twigs pits ditches etc Tall grass can hide obstacles Mowing slopes can be dangerous Do not use the lawn mower on very steep slopes The lawn mower should not be used on inclines greater than 15 degrees On sloping ground you should work along the slope It is much easier to work along a slope than it is to work up and down it Be careful when you are approaching hidden corners and objects that could block your view Work safety A lawn mower is only designed to mow lawns All other use is forbidden Wear personal protective equipment See instructions under the Personal protective equipment heading Do not start a lawn mower unless the cutter and all covers are fitted correctly Otherwise the cutter could come loose and cause personal injuries Make sure the cutter does not hit foreign objects such as stones roots or the like This can make the cutter dull and bend the engine shaft A bent axle gives imbalance and heavy vibration which results in a great risk of the cutter becoming loose The brake handle must never be permanently anchored in handle when the machine is running Place the lawn mower on firm flat surface and start it Make sure that the cutter cannot come into contact with the ground or other objects Always place yourself behind the machine Allow all the wheels to remain on the ground and keep both hands on the handle when mowing Keep your hands and feet away from the rotating blades Do not tilt the machine when the engine is running Never run with the machine when it is running You should always walk with the lawn mower Pay particular attention when pulling the machine towards you during work Never lift up the lawn mower or carry it around when the engine is running If you must lift the lawn mower first switch off the engine and disconnect the ignition lead from the spark plug The engine should be switched off when moving over ground that is not to be mowed For example gravel paths stone shingle asphalt etc Never run with the machine when it is running You should always walk with the lawn mower Shut down the engine before changing the cutting height Never make adjustments with the engine running Never leave the machine unsupervised with the motor running Turn off the motor Ensure the cutting attachment has stopped rotating If any foreign object is hit or if vibrations occur stop the machine immediately Disconnect the HT lead from the spark plug Check that the machine is not damaged Repair any damage Basic working techniques Always cut with a sharp blade for optimal results A dull blade gives an uneven cut and the grass becomes yellow on the surface of the cut Never mow more than 1 3 of the length of the grass This especially applies during dry periods Mow first with the cutting height set high Then check the resultand lowerto an appropriate height If the grass is really long drive slowly and mow twice if necessary Cut in different directions each time in order to avoid stripes in the lawn Before pulling the machine towards you disengage the drive and push the machine forward approx 10 cm Make sure to disengage the drive when approaching an obstacle Transport and storage Secure the equipment during transportation in order to avoid transport damage and accidents Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons Store the machine and its equipment in a dry and frost proof place For transport and storage of fuel see the section Fuel handling

Скачать
Случайные обсуждения

Ответы 0

Зазоры клапанов?
4 года назад