Husqvarna LB 348V [76/278] Operating

Husqvarna LB 348V [76/278] Operating
76 – English
OPERATING
Starting and stopping
Before starting
Keep people and animals well away from the working
area.
Perform daily maintenance. See instructions in the section
"Maintenance".
Ensure the ignition lead sits correctly on the spark plug.
Starting
The engine brake handle must be held against the
handlebar when the engine is started.
Position yourself behind the machine.
LC353VB
Set the stop switch to the start position.
Grip the starter handle, slowly pull out the cord with your
right hand until you feel some resistance (the starter pawls
grip). Pull with force to start the engine. Never twist the
starter cord around your hand.
LC353VB are equipped with a blade brake.
To make the cutters rotate, do the following:
Move the blade knob to its end position.
LC 348VE, LC 353VE
LC 348VE and LC 353VE are equipped with electronic start
which is used in the following way.
Before using the electronic start for the first time you need
to charge the battery.
See instructions in the section "Maintenance".
Fold in the engine brake handle towards the handlebar.
Insert the ignition key and push the key.
Drive
To use the drive on the wheel pull the clutch lever towards
you.
When the drive starts feeling slow you need to adjust the
clutch wire. Finely adjust the wire using the adjuster screw.
To tension the wire and increase speed, screw the
adjustment screw counterclockwise.
Make sure the wires are not tensioned too tight. If the lawn
mower starts to drive withtout the clutch lever is beeing
operated, extend the wire.
To extend the wire and reduce speed, screw the
adjustment screw clockwise.
Stopping
LB348V , LC348V, LC348VE, LC353V, LC353VE
Stop the engine by releasing the engine brake handle.
The drive is also disengaged when you release the brake
handle.
Machines with electric start remove the key.
LC353VB
The cutter stops rotating when you release the brake handle.
The engine is switched off by moving the stop switch to the
stop position.
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before using the
machine.
Wear personal protective equipment. See
instructions under the ”Personal protective
equipment” heading.
1
2

Содержание

Похожие устройства

OPERATING Starting and stopping Drive Before starting To use the drive on the wheel pull the clutch lever towards you WARNING Please read the operator s manual carefully and make sure you understand the instructions before using the machine Wear personal protective equipment See instructions under the Personal protective equipment heading When the drive starts feeling slow you need to adjust the clutch wire Finely adjust the wire using the adjuster screw Keep people and animals well away from the working area Perform daily maintenance See instructions in the section Maintenance Ensure the ignition lead sits correctly on the spark plug Starting The engine brake handle must be held against the handlebar when the engine is started To tension the wire and increase speed screw the adjustment screw counterclockwise Position yourself behind the machine Make sure the wires are not tensioned too tight If the lawn mower starts to drive withtout the clutch lever is beeing operated extend the wire LC353VB Set the stop switch to the start position Grip the starter handle slowly pull out the cord with your right hand until you feel some resistance the starter pawls grip Pull with force to start the engine Never twist the starter cord around your hand To extend the wire and reduce speed screw the adjustment screw clockwise Stopping LC353VB are equipped with a blade brake LB348V LC348V LC348VE LC353V LC353VE To make the cutters rotate do the following Stop the engine by releasing the engine brake handle The drive is also disengaged when you release the brake handle Move the blade knob to its end position Machines with electric start remove the key LC353VB The cutter stops rotating when you release the brake handle LC 348VE LC 353VE LC 348VE and LC 353VE are equipped with electronic start which is used in the following way Before using the electronic start for the first time you need to charge the battery See instructions in the section Maintenance Fold in the engine brake handle towards the handlebar Insert the ignition key and push the key 76 English The engine is switched off by moving the stop switch to the stop position

Скачать
Случайные обсуждения

Ответы 0

Зазоры клапанов?
4 года назад