LG GW-P207FTQA [32/39] Care and maintenance

LG GW-P207FTQA [32/39] Care and maintenance
3232
Care and maintenance
How to dismantle parts
Care and maintenance
Vacuum Fresh
(Applicable to some
models only)
Ice maker
(Applicable to some
models only)
Ice storage bin
(Applicable to some
models only)
Space Plus
(Applicable to some
models only)
Refreshment centre
(Applicable to some
models only)
Separate the lamp by pulling it outwhile
slightly pressing and rotating the lamp cover.
Turn the bulb counterclockwise. Use a 40-watt
bulb(max.) which can be purchased at a service
centre.
To remove the lamp cover, press the protrusion under the lamp cover to the
front and then pull the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and
can be purchased at a service centre.
Refrigerator
compartment
lamp
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
(Applicable to
some models only)
After dispenser is
used
(Applicable to
some models only)
NOTE
• Dismantle by reversing the assembly instructions. Be sure to unplug the power
plug before dismantling and assembly. Never apply severe force to dismantle
parts. Parts may be damaged.
NOTE
• Not all bulbs will fit your refrigerator.
Be sure to replace the bulb will one of the same size, shape and wattage.
The dispenser lights are LEDs that can not be changed.
To remove a shelf, push the shelf to the left
,lift the left part of the shelf a bit , lift the right
part up , and take it out.
Lift the door rack holding both sides and pull
it out .
Hold the ice storage bin as shown in the right
figure and pull it out while slightly lifting it .
▪ Do not dismantle the ice storage bin unless it
is necessary.
▪ Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
OPTION 1
First take out the water collector cover.
Press the cover where PUSH marked to
lift the water collector cover up.
Take out the water collector cover as
illustrated .
OPTION 2
Remove the cover by pulling the front side
of water collector cover and dry it with a
cloth.
Pull the cover fully to the front and pull
it out. Clean the base and cover with a
dry cloth.
ENGLISH

Содержание

Скачать