Oleo-Mac PW 170 C [18/140] Eatures an

Oleo-Mac PW 170 C [18/140] Eatures an
water returns to the suction unit thanks to the pressure control valve.
: this aids starting up the water cleaner by lowering the pressure for the rst moments of its operation.
2 featuresandteChnICalspeCIfICatIons
PW 160 - PW 160C - IP 1600 PW 170C - IP 1700S
ELECTRICAL CONNECTION
Mains power supply 230 V - 1~50 Hz
Absorbed power 2,3 kW 2,7 kW
Fuse 16 A
HYDRAULIC CONNECTION
Maximum inlet water temperature 50 °C - 122 °F
Minimum inlet water temperature 5 °C - 41 °F
Minimum inlet water ow 600 l/h - 158 US gph 700 l/h - 185 US gph
Maximum inlet water pressure 0,8 MPa - 8 bar - 116 psi
Maximum priming depth 0 m - 0 in
PERFORMANCE
Water ow 480 l/h - 127 US gph 540 l/h - 143 US gph
Maximum pressure 14 MPa - 140 bar - 2031 psi 15,5 MPa - 155 bar - 2248 psi
Recoil of cleaner gun 24 N 25 N
Sound level 75 dB (A) 81 dB (A)
Operator arm vibrations 1,14 m/s2 2,24 m/s2
WEIGHT AND DIMENSION
Lenght x width x height 38 x 32 x 89 cm - 15 x 13 x 35 in
Weight 17 kg - 37 lb 19 kg - 42 lb
Detergent tank 1,75 l - 0,46 US gal
All features and technical specications are only indications. The Manufacturer reserves the right to modify the appliance
as it deems necessary.
2.1IdentIfICatIonofComponents
Please also refer to gures to , which are located at the start of these operating and maintenance instructions.
1. Switch
2. Electrical wire + plug
3. Pressure indicator
4. Detergent tank lling plug (only PW 170C - IP 1700S)
5. Water outlet connection (only PW 160 - IP 1600)
6. Hose reel (only PW 160C - PW 170C - IP 1700S)
7. High-pressure hose
8. Water gun
9. Water gun lever
10. Water gun lever safety lock
11. Lance hose
12. Nozzle-holding multi-adjusting head
13. Knob and hose reel lever (only PW 160C - PW 170C -
IP 1700S)
14. Water suction connection
15. Water suction lter
16. Setscrew wrench for nozzle disassembly
17. Pin for nozzle cleaning
18. Technical data plate
19. Room for housing the lance pipe
20. Room for housing the water gun
21. Support to wind the electrical wire
22. Rotojet (only PW 160C - PW 170C - IP 1700S)
25. Water cleaner/hose reel connecting hose (only
PW 160C - PW 170C - IP 1700S)
26. Accessory support (only PW 160C - PW 170C -
IP 1700S)
27. Caution plate
28. Thermal switch
29. Warning plate
30. Handlebar
31. Foaming lance (only PW 160C - PW 160 - IP 1600)
2.2safetydevICes
This water cleaner is provided with the following safety devices:

This blocks the operation of the water cleaner in case of excessive consumption of electrical current.
In this case, proceed as follows:
- switch the main switch  to position  and remove the plug from the power outlet;
- press the lever  on the cleaner gun to eliminate any remaining pressure;
- wait 10 to 15 minutes until the water cleaner cools down;
- check that the instructions in the

section have been followed, particularly regarding any extension cord used;
- replace the electric plug in the power outlet and repeat the start-up procedure described in the

section.

Содержание

Похожие устройства

Скачать
Случайные обсуждения