SNR S2989G-48TX [22/553] Management via http

S2989G-24TX Operation Manual

Chapter

Basic

Management

Configuration

1-7

switch from unauthorized access. As a result, when Telnet is enabled for configuring and

managing the switch, username and password for authorized Telnet users must be

configured with the following command: username <username> privilege <privilege>

[password (0|7) <password>]. To open the local authentication style with the following

command: authentication line vty login local. Privilege option must exist and just is 15.

Assume an authorized user in the switch has a username of “test”, and password of “test”,

the configuration procedure should like the following:

Switch>enable

Switch#config

Switch(config)#username test privilege 15 password 0 test

Switch(config)#authentication line vty login local

Enter valid login name and password in the Telnet configuration interface, Telnet user

will be able to enter the switch’s CLI configuration interface. The commands used in the

Telnet CLI interface after login is the same as that in the Console interface.

Figure 1-8 Telnet Configuration Interface

1.1.1.2.2 Management via HTTP

To manage the switch via HTTP, the following conditions should be met:

1) Switch has an IPv4/IPv6 address configured;

2) The host IPv4/IPv6 address (HTTP client) and the switch’s VLAN interface IPv4/IPv6

address are in the same network segment;