Shure MXA910W [7/63] Differences between 3 x and 4 x firmware

Shure MXA910W [7/63] Differences between 3 x and 4 x firmware
Shure Incorporated
7/63
ANI4OUT), который преобразует аудиоканалы Dante в аналоговые сигналы, подающиеся с помощью 4 дискретных
выходов XLR или выходов блочного соединителя.
Управление устройством и аудиосигнал Dante
Управление: компьютер, подключенный к сети, используется для управления микрофоном с помощью программно-
го обеспечения Shure Designer. Можно удаленно настраивать охват, отключение звука, работу светодиода, парамет-
ры лепестков, усиление и сетевые параметры.
Аудиосигнал: маршрутизация аудиосигнала с помощью программного обеспечения Dante Controller или Shure
Designer. Приложение Dante Virtual Soundcard позволяет выполнять аудиомониторинг и запись непосредственно на
компьютере.
Differences Between 3.x and 4.x Firmware
When you update an MXA910 from 3.x to 4.x firmware, you'll be able to use IntelliMix DSP features optimized for MXA.
Here's what changes with 4.x firmware:
IntelliMix DSP Added
You can now use AGC, AEC, noise reduction, compressor, and delay.
These DSP features don’t affect individual channel outputs—they only apply to the Automix Out channel
If you’re currently using the Automix Out channel on a 3.x device and you update it to 4.x, the following settings will be
applied automatically:
AGC: enabled
AEC: enabled
Noise reduction: enabled
Compressor: disabled
Delay: disabled
New Automixer Added
The 4.x automixer has different mix modes than the 3.x automixer.
Here's how mix mode settings will change:
3.x Automixer Setting New 4.x Automixer Setting
Classic Gating
Smooth Gain Sharing
Manual Manual
Custom Gating
New Autofocus Feature Added for All Lobes
Patent-pending Autofocus technology continually fine-tunes the position of each lobe in real time.
Lobes move automatically for consistent sound when participants lean back in their chairs or stand up.
Echo Reduction Removed
The microphone now has AEC, so there's no need for echo reduction.
The Echo Reduction Reference In channel's name in Dante Controller is now the "AEC Reference In" channel. Any
existing Dante route to that channel will persist.

Содержание

Скачать