Tesla TA36FFUL-1232IA [50/56] Remote controller instructions

50

ENG

Recovery:

1. The clearance of refrigerants in the system is required when repairing or scrapping the appliance. It is

recommended to completely remove the refrigerant.

2. Only a special refrigerant tank can be used when loading the refrigerant into the storage tank. Make sure the

capacity of the tank is appropriate to the refrigerant injection quantity in the entire system. All tanks intended to

be used for the recovery of refrigerants should have a refrigerant identification (i.e. refrigerant recovery tank).

Storage tanks should be equipped with pressure relief valves and globe valves and they should be in a good

are sealed to prevent the leakage of the refrigerant and the fire caused by it. If you have any question, please

consult the manufacturer.

4. The recovered refrigerant shall be loaded in the appropriate storage tanks, attached with a transporting

instruction, and returned to the refrigerant manufacturer. Don’t mix refrigerant in recovery equipment, especially

a storage tank.

5. The space loading R32 refrigeration can’t be enclosed in the process of transportation. Take anti electrostatic

measures if necessary in transportation. In the process of transport, loading and unloading, necessary protective

measures must be taken to protect the air conditioner to ensure that the air conditioner is not damaged.

6. When removing the compressor or clearing the compressor oil, make sure the compressor is pumped to an

appropriate level to ensure that there is no residual R32 refrigerants in the lubricating oil. The vacuum pumping

1. Aim the remote controller towards the receiver on the airconditioner.

2. The remote controller should be within 8 meters away from the receiver.

3. No obstacles between the remote controller and receiver.

4. Do not drop or throw the remote controller.

5. Do not put the remote controller under the forceful sun rays or heating facilities and other heating sources.

6. Use two 7# batteries, do not use the electric batteries.

7. Take the batteries out of remote controller before stop its using for long.

8. When the noise of transmitting signal can’t be heard indoor unit or the transmission symbol on the display

screen doesn’t flare, batteries need be replaced.

9. If reset phenomenon occurs on pressing the button of the remote controller, the electric quantity is deficient

operations, the remote controller screen displays related items only.

• The cooling only units don’t have the function of heating or electric heating. When the remote controller turns to

such function buttons, the units will not result such effect. Please don’t turn the remote controller to such buttons.