Compack К3 Touch adv [11/23] Regulation

K01070 | v. 09/06/2016 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS

8. REGULATION

8.1. Grinder set up

Place the hopper ( ) on the grind regulator ( ) and make sure the bean trap ( )

is in the closed position. Lock the hopper ( ) in place using a at head screw driver

to gently tighten the hopper security screw making it match to the hole at the bean

hopper collar ( ) (Fig. 1).

Remove the hopper lid ( ), ll the Hopper with coffee ( ), and replace the lid on the

hopper ( ) (Fig. 2).

Plug in the grinder, and place the main power switch ( or ) to position I and open

the bean trap ( ) to allow coffee to pass into the grind chamber. In the TOUCH

ADVANCED model, place the main power switch ( ) ON-OFF in position ON and

place the mode switch ( ) on mode MANUAL (M).

In the PUSH / TOUCH models, the power switch I-0-II is situated on the right side

and on the TOUCH ADVANCED the main power switch is situated on the right side

while the MODE switch is on the left hand side