Home
Главная
Brayer
Кофеварка
BR-1100
Руководство по эксплуатации Страница: 6

Brayer BR-1100 [6/32] 11 en en

10 11en en

• Note: repeated making of coffee should be

performed after at least 5 min interval.

WARMING THE DRINKS

• You can warm up your drinks by putting the

cappuccinator pipe (14) without the tip (15) into the

cup with the drink.

• Set the operation mode switch knob (7) to the

position « », wait until the indicator (8) lights up

white.

• Put the cappuccinator pipe (14) without the tip (15)

into the cup with the drink you want to warm up. Set

the operation mode switch knob (7) to the position

« ».

• After warming up the drink set the operation mode

switch button (7) to the position « ».

• Switch the coffee maker off by setting the power

switch (16) to the position «0», the indicator (9) will

go out.

REMOVING MINERAL SCALE

• The indicators (8, 9) ashing by rotation mean that

150 cycles of coffee making or milk frothing have

passed, and it is necessary to clean the coffee maker

from mineral scale.

• Remove the water tank (13) and ll it with water and

descaling agent up to the maximal level. You can use

«homemade descaling agent» — citric acid solution

in proportion 100 portions of water per 3 portions of

citric acid.

• Install the lter (6) in the lter holder (5), do not put

ground coffee in the lter (6). Install the lter holder

(5) into the coffee maker. The holder (5) ledges

should match the grooves on the boiler, after that

turn the lter holder (5) handle (3) to the right until

bumping «

». Place a suitable cup on the grid (2).

• Set the operation mode switch knob (7) to the

position « », the pump will be switched on and

operate for 90 seconds. After that set the operation

mode switch knob (7) to the position « », leave the

descaling agent in the coffee maker for at least 5-10

minutes.

• Make sure that there is descaling agent in the water

tank (13).

• Place a suitable cup under the cappuccinator tip

(15), set the operation mode switch knob (7) to the

position « », the pump will be switched on and

operate for 90 seconds. After that set the operation

mode switch knob (7) to the position « ».

• Then wash the coffee maker. To do this, ll the water

tank (13) with tap water and repeat the steps 3, 5

twice without 5-10 minutes break.

• After you nish cleaning the coffee maker, the

indicators (8, 9) will stop ashing. The cleaning is

nished.

• If you don’t want to clean the coffee maker right now

and you are going to clean it as soon as possible,

quickly turn the operation mode switch knob (7) to

the position « », then to the position « », to the

position «

» and again to the position « ». If you

do this within 3 seconds, the cleaning notication (the

indicators (8, 9) ashing) will be cancelled.

• Clean the coffee maker as soon as possible, do not

delay cleaning for later.

• Note: to remove the scale you can use special

descaling agents for coffee makers and coffee

machines, strictly following the instructions on their

usage.

CLEANING THE COFFEE MAKER

• If there is ground coffee scale remainin in the lter (6)

openings, clean the lter (6) with a small brush.

• Wipe the coffee maker body with a soft, slightly damp

cloth and then wipe the coffee maker body dry. Do

not use abrasives and solvents to clean the coffee

maker body.

• Do not immerse the coffee maker body, the power

cord and the power plug into water or any other

liquids.

• Wash the removable parts of the coffee maker with

warm water and neutral detergent, then rinse them

and dry.

DRIP TRAY (1)

• Remove the grid (2) from the tray (1), remove the

tray (1) and pour out water, wash the tray (1) and put

it back to its place, put the grid (2) on the tray (1).

STORAGE

• Before taking the coffee maker away for long storage,

unplug it and let the unit cool down.

• Clean the coffee maker.

• Pack the coffee maker in the original package.

• Use and store the coffee maker at the temperature

above 0 °C.

• Keep the coffee maker in a dry cool place out of

reach of children and disabled persons.

TROUBLESHOOTING

Problem Cause Solution

Water leaks from

the bottom of the

coffee maker

The tray is full of

water.

Please, clean the tray.

The coffee

maker is

damaged.

Please, apply to the service

center for repairing the

coffee maker.

Water leaks from

the lter holder.

There is ground

coffee on the

lter.

Clean the lter edges from

ground coffee.

Ready coffee

has unpleasant

taste.

The coffee

maker was not

washed after

descaling.

Clean the coffee maker

from mineral scale and

wash it from the remaining

descaling agent.

Ground coffee

was stored in a

humid place for

a long time.

Please, use fresh ground

coffee. Keep unused

ground coffee in a hermetic

package in a dry cool place.

Brayer BR-1100 [6/32] 11 en en

Содержание

Похожие устройства