Home
Главная
Redmond
Утюг
RI-C222-E
Руководство по эксплуатации Страница: 6

Redmond RI-C222-E [6/156] Iii cleaning and maintenance

Water spray feature

Use the water spray feature to dampen hard-to-iron fabrics, remove stubborn wrinkles, and to

iron difcult areas such as collars, etc. Press the water spray button to dampen the fabric:

• slowly and smoothly for a dense spray

• quickly for vaporized spray

The feature can be used as often as required from any temperature mode, as long as there

is enough water in the water tank.

Auto shut-off feature

The auto shut-off feature ensures safety and reduces energy consumption. The iron auto-

matically shuts off when left unattended:

• after 30 seconds of inactivity in horizontal position or on its side (tipped over)

• after 8 minutes of inactivity in vertical position

After the auto shut-off occurs the soleplate stops heating, audible signal is heard, the auto shut-off

indicator on the handle starts ashing. To continue ironing take the iron by the handle. The auto

shut-off indicator will stop ashing, the heating indicator will light up. Once the soleplate reaches

the required temperature the heating indicator will go out, indicating that the iron is ready to use.

Anti-drip feature

The anti-drip feature prevents water from dripping onto fabric and enables to iron even the

most delicate garments. Use low temperature setting (• position) to iron delicate fabrics.

After each use

Turn the temperature control dial into “Min” position and the steam output control dial into

position. Unplug the iron from electrical outlet. Open the water tank cap and gently shake

the iron above the sink to empty the tank. Place the iron into a vertical position.

Wait for the soleplate to cool down thoroughly. Wind the cord around the heel of the iron.

Store in vertical position.

Fabric Ironing Chart

Symbol of the

temperature

mode

Temperature

control dial

position

Fabric Ironing recommendations

•

SYNTHETICS

Acrylic

Iron carefully. Do not use steam ironing

to prevent water from dripping out of

soleplate and staining the fabric

Polyamide (cap-

ron, nylon)

Polyurethane

Acetate

Iron on reverse side, fabric cannot with-

stand high heat. Acetate dries fast and

needs little ironing

Polyester Iron using a damp press cloth

•

SYNTHETICS Viscose

High heat may cause discoloration,

shrinkage, or melting of fabric

Symbol of the

temperature

mode

Temperature

control dial

position

Fabric Ironing recommendations

• •

SILK/WOOL

Silk

Do not use spray on silk to avoid water

marks

Wool

Use spray or damp press cloth to iron

wool. High heat may cause shrinkage

• • •

COTTON/LINEN Cotton, linen Steam ironing is recommended

III. CLEANING AND MAINTENANCE

Self-clean feature

To remove scale and other debris from the steam holes on the soleplate carry out the self-

cleaning procedure at least twice a month. The harder the water the more frequently the

iron should be self-cleaned.

1. Fill the water tank with water until the “Max” ll line.

2. Disable the steam feature (turn the steam output control dial into position). Turn

the temperature control dial into “Max” position. Plug in the iron.

After the heating indicator goes out unplug the iron and position it horizontally above

the sink.

4. Press and hold down the “Calc Clean” button, swinging the iron lightly back and forth.

Steam and hot water releasing from the soleplate will remove scale and other debris.

5. By the end of the self-cleaning procedure open and empty the water tank. Close the cap.

6. Wait for the soleplate to cool down thoroughly and wipe with damp cloth.

7. Repeat the procedure if necessary.

NOTE! Use tap water to carry out the self-cleaning procedure. Do not ll the water tank with

distilled (demineralized), softened, or boiled water for best results.

To clean soleplate

Before cleaning the soleplate ensure that the iron is unplugged and cooled down thor-

oughly. Cool soleplate can be wiped with damp cloth or sponge. Do not use abrasive

cleaners, aggressive chemicals, and abrasive or metal sponges.

Iron storage

The appliance must be stored in a dry location away from direct sunlight or heating appli-

ances. Store the iron in vertical position to avoid damage to the soleplate. To keep the

soleplate in good condition do not allow it to come into contact with metal and other hard

or sharp objects.

Always store the iron empty to prevent the lime scale build-up that may stain fabric during

ironing.

Redmond RI-C222-E [6/156] Iii cleaning and maintenance

Содержание

Похожие устройства