Home
Главная
Redmond
Утюг
RI-C222-E
Руководство по эксплуатации Страница: 7

Redmond RI-C222-E [7/156] Avoid placing the iron on sharp

GBR

RI-C222-E

IV. BEFORE CONTACTING SERVICE CENTRE

Problem Possible cause Solution

Soleplate remains cold,

heating indicator does

not light up

The power cord is not connected to

an electrical outlet

Connect to an electrical outlet

Electrical outlet is not working prop-

erly

Connect to properly functioning

electrical outlet

Auto shut-off feature activated (auto

shut-off indicator on the handle is

ashing)

Refer to section “Auto shut-off fea-

ture”

Soleplate barely warms

Selected temperature is too low

Turn the temperature control dial to

select required temperature

Iron produces no steam

Steam feature is disabled

Turn the steam output control dial

to select required steam output

Iron produces very lit-

tle steam

Not enough water in the water tank Fill the water tank at least ¼ full

The steam output control dial is set

to medium setting

Turn the steam output control dial

to increase steam output

Anti-drip feature activated

Wait for the soleplate to reach the

selected temperature (heating indi-

cator goes out)

Steam coming from the

holes in soleplate

stains fabric

You used water with chemical addi-

tives

Do not use water with chemical ad-

ditives

You used distilled or softened water

Use common tap water or half tap

water and half distilled water

You did not empty the water tank

after last use

Carry out the self-cleaning procedure.

Always empty the water tank after use

Soleplate is dirty and

stains the fabric

Selected temperature is too high

Refer to “Fabric Ironing Chart” and

garment labels to select the correct

temperature

Fabric has not been rinsed suf-

ciently or you have ironed new gar-

ment before washing it

Clean the soleplate. Thoroughly

rinse the garment to remove any

traces of detergent residue that may

damage the soleplate

Water drips from holes

in soleplate

Selected temperature is too low

Turn the temperature control dial

into • •, • • •, or “Max” position

The soleplate temperature is too low

because you are using the Steam Shot

feature too often

Increase intervals between steam

shots

Problem Possible cause Solution

Soleplate is damaged

You placed the iron down at on a

metal surface

Use special iron support. Always

store the iron in vertical position

The soleplate was damaged by a gar-

ment accessory (zip fastener, button,

rivet, etc.)

Avoid placing the iron on sharp

objects, such as zip fasteners, but-

tons, or rivets during ironing to

prevent damage to soleplate

V. PRODUCT WARRANTY

We warrant this product to be free from defects for a period of 2 years from the date of purchase.

If the appliance fails to operate properly within the warranty period and is found to be defective

in material or workmanship, we will repair or replace it free of charge. This warranty comes into

force only in case an original warranty service coupon with a serial article number and an accurate

impress of the company of the seller proves the purchase date. This limited warranty does not

cover damage caused by the failure to use this product for its normal purpose or in accordance

with the instructions on the proper use and maintenance of the product, or any kind of repair

works. Do not try to disassemble the appliance and keep all package contents. This warranty does

not cover normal wear of the appliance and its parts (lters, bulbs, non-stick coating, gaskets, etc.).

Service life and the applicable product warranty period start on the date of purchase or the

date of manufacture (if the purchase date cannot be established).

You can determine manufacture date by serial number, located on the identication label

on the housing of the appliance. The serial number consists of 13 digits. 6th and 7th digits

of the serial number identify the month, 8th digit the year of manufacture.

Service life of the product, established by the manufacturer is 3 years from the date of

purchase, provided that the appliance is used and maintained in accordance with the user

manual and applicable technical standards.

Environmentally friendly disposal (WEEE)

The packaging, user manual and the device itself shall be taken to the appli-

cable collection point for the recycling of electrical and electronic equipment.

Do not throw away the electronic waste to help protect the environment.

Old appliances must not be disposed with other household waste but must be

collected separately. Municipal disposal of recyclable wastes is free of charge.

The owners of old appliances are required to bring it to a waste facility centre.

With this little extra effort, you can help to ensure that valuable raw materials are recycled and

pollutants are treated as appropriate.

This appliance is labelled in accordance with European Directive 2012/19/EU – concerning used

electrical and electronic appliances (waste electrical and electronic equipment WEEE).

The guideline determines the framework for the return and recycling of used appliances as ap-

plicable throughout the EU.

Redmond RI-C222-E [7/156] Avoid placing the iron on sharp

Содержание

Похожие устройства