Fulgor Milano FCM 4509 TC BK [28/96] Programming the quantity of coffee in the cup

button.

The procedure for programming the quantity of coffee,

and other beverages, in the cup is as follows:

• press the coffee key for 5 seconds until the LED

ﬂashes.

• press the START/STOP key to start dispensing. The

two LEDs ﬂash for its duration.

• press the START/STOP button again when the

desired quantity is reached.

Restoring the factory settings

When it leaves the factory, the machine is calibrated

for Italian-style espresso coffee and German-style

stretched coffee.

• If you need to restore these standard values, you

must place the machine in standby and press the

coffee regulation button for 6 seconds.

• You will see all the LEDs, except on/off, ﬂash for 5

seconds; after that time, the board has stored the

default values.

• Press the on button and the selections will now use

the factory values.

The standard values are only relative to the

quantity of water necessary for each single

dose.

FOR EXPERT USERS ONLY:

PROGRAMMING THE GRINDING TIME

The grinding time for strong coffee is programmable and

medium and light coffee are calibrated accordingly.

To enter programming mode, when the machine is in

standby mode:

• press the START/STOP button for 5 seconds; the

LED s on the upper left line light up to indicate the

grinding time;

• to increase the time, press the coffee regulation

button and to, decrease it, the START/STOP button.

At the end of the operation, just press the on/off

button to exit and conﬁrm the changes.

Automatic adjustment of coffee quantity.

If the quantity of coffee has been wrongly adjusted, so

as not to allow coffee dispensing, the machine is able

to perform a series of automatic checks, until the right

quantity of coffee and therefore correct dispensing is

achieved.

Automatically and without any intervention by the

machine operator, the machine will start grinding the

coffee (indicated by a number of ﬂashes of the “generic

alarm” symbol) and will try and dispense coffee.

The procedure terminates when the coffee is dispensed

and consequently the new coffee quantity parameters

are stored.

A request could be made to perform a washing

operation. If so, perform washing as described in

chapter 7. Afterwards, make a cup of coffee. If the

machine starts grinding coffee again automatically and

without the intervention of the operator, switch it off and

call in the after-sales service.

12. PROGRAMMING THE QUANTITY OF

COFFEE IN THE CUP

All the cycles have a preset quantity, except for water

and steam.

The machine is already calibrated at the factory to

dispense the ideal quantity of coffee for an espresso

cup.

While dispensing the beverage, you can stop dispensing

before the preset time by pressing the START/STOP

Fulgor Milano FCM 4509 TC BK [28/96] Programming the quantity of coffee in the cup

Содержание

Похожие устройства