Tascam MiNiSTUDIO PERSONAL US-32 Руководство по эксплуатации онлайн [18/29] 776202
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tascam MiNiSTUDIO PERSONAL US-32 Руководство по эксплуатации онлайн [18/29] 776202

Tascam MiNiSTUDIO PERSONAL US-32 Руководство по эксплуатации онлайн [18/29] 776202
18
TASCAM MiNiSTUDIO PERSONAL
Use the equalizer to increase or decrease the
levels of specific frequency ranges. This can be
used, for example, to enhance the sound of
individual instruments, to adjust the balance
of a wide frequency range and to cut specific
unwanted frequencies. (See “COMPRESSOR
display area overview” on page 19.)
2 COMPRESSOR area
When the input volume exceeds the THRESHOLD
level, the input volume is compressed, reducing
output volume variation.
For example, by reducing the levels of loud
sounds, lower level sounds become relatively
louder, creating a more even volume level
throughout and a more sustained sound. (See
“COMPRESSOR display area overview” on page
19.)
NOTE
When the compressor is off, the compressor
curve will appear but the meters will not be
active.
3 RVB SEND display area
If a reverb type switches other than OFF is
selected, the mic reverb can be turned on/off.
Options: ON (default), OFF
4 EFFECT area
Use this to select a preset effect to apply to the
signals input through the inputs (1, 2, e and
r). Use the BALANCE knob to adjust the dry/
wet signal balance. (See “EFFECT display area
overview” on page 20.)
5 BUFFER SIZE setting area (Windows only)
The Windows driver for the unit stores the audio
signals sent to and from the computer tempo-
rarily in a buffer. This buffer size can be adjusted.
Smaller buffer sizes result in less audio signal
delay (latency), but require high-speed
processing by the computer.
If the processing cannot keep up, for example,
due to other system operations, clicking and
popping noises might occur and the audio signal
might even drop out.
Increasing the buffer size will stabilize operation
and suppress negative effects on audio signals,
but the delay in audio signals sent to the
computer will increase.
You can use button on the panel to adjust the
buffer size, according to the use conditions.
Options: 1024, 512, 256, 128, 64
6 ASIO setting area (Windows only)
This turns ASIO use on or off.
Turn this ON when using a plug-in that supports
ASIO on signals being input to the unit.
Options: ON, OFF
CAUTION
If this is left ON when not using a plug-in that
supports ASIO, input signals will not be output.
7 Reverb type switches
Use to select the type of reverb.
Depending on the type, the density and level of
the reverb sound changes.
Options: HALL, ROOM, LIVE, STUDIO, PLATE,
OFF
8 PRE DELAY knob
Set the amount of delay until the first reverber-
ations.
The larger the value, the larger the reverberations
make the room sound.
Range: 0–250 ms
9 REVERB TIME knob
Set the amount of time that the reverberations
continue.
The larger the value, the longer they continue.
Range: 0.1–10 s
0 DIFFUSION knob
Sets the breadth of the reverberations.
Range: 0–100
q Trigger sound area
Make trigger sound settings here. (See “PON
trigger effect display area overview” on page
20.)
w COMPUTER fader
Use this to adjust the amount of signal returned
from the computer.
The adjusted value is shown below the fader.
e MASTER fader
Use this to adjust the level of the output signal.
The adjusted value is shown below the fader.
r OUTPUT setting area
Set whether the MASTER signal output is mono
or stereo.
Options: STEREO, MONO
t USB DELAY setting area
During live broadcasts, screen capture latency
can result in timing differences between video
and audio. By intentionally adding delay to
the audio output by USB, you can correct this
difference.
Range: 0 ms–2000 ms
y DIRECT MONITOR setting area
DIRECT MONITOR setting is only for the MiNiS-
TUDIO CREATOR.
It cannot be used with this unit.
The direct monitoring signal is automatically set
to MONO.

Содержание

Похожие устройства

Скачать