![RME OCTAMIC XTC [47/62] General](/img/pdf.png)
RME OCTAMIC XTC [47/62] General
![RME OCTAMIC XTC [47/62] General](/views2/2007994/page47/bg2f.png)
User’s Guide OctaMic XTC © RME
47
21.6 General
• Power supply: Internal switching PSU, 100 - 240 V AC, 30 Watts
• Typical power consumption: 14 Watts
• Maximum power consumption: < 20 Watts
• Dimensions including rack ears (WxHxD): 483 x 88 x 242 mm (19" x 3.46" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 88 x 235 mm (17.2" x 3.46" x 9.3")
• Weight: 3 kg ( 6.6 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing
21.7 Firmware
The OctaMic XTC is internally based on programmable logic. By re-programming of a little com-
ponent called Flash-PROM, both function and behaviour of the unit can be changed at any time.
At the time of writing this manual, the unit is shipped with firmware 21/35. The firmware version
is displayed after power on for about one second on the display, and listed in the menu SETUP
– Options – General Settings – SW-Version.
Firmware Updates: If available then they are found on the RME website (www.rme-audio.de
) in
the section Downloads, free of charge. See chapter 16 for more details.
21.8 MADI User Bit Chart
• RS-232: channels 1 to 9 (internal through mode always active)
• ADC: channel 19
• MIDI: channel 56 (48k) / 28 (96k)
Содержание
- Autose 1
- Octamic xtc 1
- Professional mic line instrument preamp 8 channel microphone line ad converter 4 channel line phones da converter 8 channel analog to aes adat interface 64 channel madi interface adat aes madi format converter 24 bit 192 khz digital audio midi remote control usb 2 class compliant operation 1
- Quickgai 1
- Steadycloc 1
- User s guide 1
- General 2
- Inputs and outputs 2
- Usage and operation 2
- Class compliant mode 3
- Technical reference 3
- Important safety instructions 4
- General 5
- Octamic xtc 5
- User s guide 5
- Brief description and characteristics 6
- Introduction 6
- Package contents 6
- Controls connectors displays 7
- First usage quick start 7
- Accessories 9
- Quick start 9
- Appendix 10
- Warranty 10
- Ce fcc compliance 11
- Iso 9001 11
- Note on disposal 11
- Octamic xtc 13
- Usage and operation 13
- User s guide 13
- Encoders 14
- Front panel controls 14
- Select keys 14
- Menu keys 15
- Channel menu 16
- Setup menu 18
- Clock section 21
- Phantom power 22
- The input channel in detail 22
- Autoset 23
- Instrument 23
- Delay compensation 24
- Using multiple units with madi 24
- Compensation id 25
- Control via totalmix fx 26
- Midi over madi 26
- Remote control 26
- Inputs and outputs 27
- Octamic xtc 27
- User s guide 27
- Analog inputs outputs 28
- Instrument in 28
- Line in trs 28
- Mic line in xlr 28
- Phones line out 29
- Aes ebu 30
- Digital inputs and outputs 30
- Adat optical 31
- Word clock 34
- Word clock input and output 34
- Operation and technical background 35
- Cabling and termination 36
- Class compliant mode 37
- Octamic xtc 37
- User s guide 37
- General 38
- Operation 38
- System requirements 38
- Useful hints 39
- Class compliant mode under windows and mac os x 40
- Operation at the unit 41
- Supported inputs and outputs 41
- Octamic xtc 43
- Technical reference 43
- User s guide 43
- Analog 44
- Technical specifications 44
- Digital inputs 45
- Digital 46
- Digital outputs 46
- Firmware 47
- General 47
- Madi user bit chart 47
- Connector pinouts 48
- Technical background 50
- Terminology 50
- Lock and synccheck 51
- Latency and monitoring 52
- Ds double speed 53
- Qs quad speed 53
- Aes ebu spdif 54
- Signal to noise ratio in ds qs operation 55
- Madi basics 56
- Steadyclock 57
- Block diagram 58
- Basic sysex format 59
- Message types commands 59
- Midi implementation octamic xtc 59
- Parameters 60
- Table commands 60
- Details 61
- Level meter data 61
- 43 64db pdb value 65 22 43 64db pdb value 65 62
- 5 0db 6db pdb value 125 0 125 5 0db 6db pdb value 125 0 62
- 6 db 42db pdb value 107 0 94 3 6 db 42db pdb value 107 0 62
- Abbreviations 62
- Bit 1 mute bit 1 mute 0x02 62
- Bit 2 3 phase invert 0 off 1 both 2 left 3 right bit 2 3 phase invert 0 off 1 both 2 left 3 right 0x04 62
- Bit 4 level 0 low 1 high bit 4 level 0 low 1 high 0x08 62
- Level meter send only level meter send only 62
- Lsb channel 1 62
- Lsb source bit 0 0x01 62
- Msb bit 0 bit 7 source see value table 1 62
- Msb channel 2 62
- N a not assigned s d see details 62
- Phones settings 62
- Underflow 0 underflow 62
- Value 126 ovr 62
- Value table 1 phones sources 62
- Value table 2 digital routing sources 62
- Value table 3 midi sources 62
Похожие устройства
- RME MADI Converter Руководство по эксплуатации
- RME OCTAMIC II Руководство по эксплуатации
- Roland DJ-202 Руководство по эксплуатации
- RME M-32 DA Руководство по эксплуатации
- RME M-32 AD Руководство по эксплуатации
- RME HDSPe MADI FX Руководство по эксплуатации
- Soundcraft Si Performer 2 Руководство по эксплуатации
- RME ADI-648 Руководство по эксплуатации
- RME HDSP 9652 Руководство по эксплуатации
- Native Instruments Komplete Kontrol A25 Руководство по эксплуатации
- RME ADI-6432 Руководство по эксплуатации
- RME ADI-2 Руководство по эксплуатации
- Sennheiser AB 3-B Руководство по эксплуатации
- Se Electronics X1 S Руководство по эксплуатации
- Se Electronics X1 A Руководство по эксплуатации
- Se Electronics V7 MC1 Руководство по эксплуатации
- Se Electronics SE 4ST Руководство по эксплуатации
- Se Electronics SE 2200 Руководство по эксплуатации
- ONSTAGE GPB4000 Руководство по эксплуатации
- Rode NT-USB Руководство по эксплуатации