Art SLA-2 Руководство по эксплуатации онлайн [11/16] 776426

Spade Connector – Loosen the red and black caps on the binding

posts (don’t completely remove). Insert the spade connector into the

binding post and tighten the caps down on the spade connector. Be

sure that the wire connected to one post does NOT

come in contact

with that of another post.

Banana Plug – Insert the banana plugs into the caps of the binding

posts. Be sure that the red and black caps on the binding posts are

tightened down completely and that they are securely connected to

avoid the possibility of the banana plugs from popping out.

SMARTFAN™

The SLA-2 features SmartFan™, an advanced, thermal dependent fan

assisted convection cooled system. The SmartFan™ system is

dependent upon the internal ambient temperature inside the unit, and

runs at two different levels. The SmartFan™ system is extremely quiet.

Do not block the fan or constrict air circulation. Doing so may cause

the amp to overheat and/or shutdown.

FUSE

The SLA-2 utilizes a (T10A 250v 20mm) 10 Amp fuse. Be sure to

replace any blown fuses with a fuse of equal rating only.

AC POWER INPUT

The SLA-2 features an internal power supply. Plug the detachable

cable into a standard wall outlet. Be sure that the supplied voltage

matches that of the required voltage labeled on your amplifier. Never

plug the amp into an outlet that does not match the required voltage of

your amplifier. Serious damage could result.