LINE 6 Spider Valve MkII HD100 Руководство по эксплуатации онлайн [15/41] 777363

Editing

3•3

Gate

If you press the right arrow from the Reverb screen, you’ll see the Gate screen. Your Gate

Mode choices are Off (Gate is disabled), Gate (a standard noise gate), NR (a frequency

dependent noise reduction) or Gate+NR (both Gate+NR together). You can also adjust

Threshold and Decay settings. Gate parameters are saved with the individual preset.

Boost

We’ve included a new Boost with Spider Valve MkII, which is the next Edit Mode screen

to the right of Gate. Boost has 3 parameters: Pre, which lets you set the amount of Boost

before your signal hits the Amp Model, Post, which lets you set boost level after the Amp

Model, and Active, where your choices are On or Off. Boost is also saved per preset.

Vol

Press right arrow from the Boost screen to see Vol. If you use an FBV or expression pedal

to control Volume, you can set its parameters for Min (the minimum volume for heel

down), Max (the maximum volume for toe down) and Routing, which routes the volume

pedal pre or post Amp Model. Vol is saved per preset.

Loop

If you press right arrow from the Vol screen you’ll arrive at the Loop screen. This screen

is dedicated to Loop routing, and is saved per preset. Pre routes your loop audio before the

Amp Model; Post routes it after the Amp Model.

MIDI

Press right arrow from Loop to set your MIDI Channel and Output mode (Out or Thru).