Behringer FCB1010 [6/16] Global configuration
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Behringer FCB1010 [6/16] Global configuration

Behringer FCB1010 [6/16] Global configuration
6 MIDI FOOT CONTROLLER FCB1010 User Manual
2.1.1 DIRECT SELECT deactivated
Let’s assume you wish to select PRESET #1 from BANK #3...
Step 1
Use the UP/DOWN switches to go to the BANK that contains the PRESET of your
choice (here: BANK #3).
Step 2
Select the PRESET you wish to use (here: PRESET #1).
Step 2 Step 1
Fig. 2.1: PRESET selection with DIRECT SELECT disabled
2.1.2 DIRECT SELECT activated
If DIRECT SELECT is on, do as follows to select PRESET #1 from BANK #3
(activatingDIRECT SELECT is discussed in ch. 2.2.1):
Step 1
Select the BANK of your choice (here: BANK #3) by stepping on footswitch #3.
Step 2
Select the PRESET you wish to use (here: PRESET #1) by stepping on footswitch
#1. The display shows that preset 31 is selected.
Step 2 Step 1
Fig. 2.2: PRESET selection with DIRECT SELECT enabled
As this example shows, the DIRECT SELECT feature gives you a faster access to
BANKS and PRESETS than without this function. Which option to use is entirely up
to you. As long as you need the PRESETS from one BANK only, it will be advisable
to disable the DIRECT SELECT function because this way you can recall a new
preset with only one keystroke.
2.2 GLOBAL CONFIGURATION
In the GLOBAL CONFIGURATION menu you can set the parameters that apply to
both the PRESETS and FUNCTIONS of your FCB1010 (e.g. MIDI channel selection,
SysEx SEND & RCV, DIRECT SELECT etc.). Keep the DOWN switch pressed during
power-up for about 2.5 sec to enter GLOBAL CONFIGURATION mode.
The DIRECT SELECT LED in the display lights up.
You can use the UP and DOWN keys to navigate through GLOBAL CONFIGURATION
main pages. Pressing UP leafs through the pages forward, pressing DOWN leafs
the pages backward. A corresponding LED indicates what page you are on.
CONFIG.
SELECT
MIDI CHANNEL
SELECT
MIDI FUNCTION
GLOBAL
CONFIGURATION
DIRECT SELECT
DOWN
UP
DOWN
DOWN
UP
Fig. 2.3: GLOBAL CONFIGURATION menu structure
To leave GLOBAL CONFIGURATION menu, you need to press the DOWN/ESCAPE key
for at least 2.5 sec.
◊ Only keeping the DOWN/ESCAPE key pressed for at least 2.5 sec. saves
your newly entered settings!
2.2.1 DIRECT SELECT page
Keep the DOWN/ESCAPE key pressed while you power up the unit. This takes you
to the GLOBAL CONFIGURATION menu; the green DIRECT SELECT LED lights up.
Toactivate DIRECT SELECT, press 10/0 key. The red LED lights up. Now, you have
to conrm activating DIRECT SELECT to be able to directly select presets. To do
this, keep DOWN/ESCAPE pressed for 2.5 sec. to exit GLOBAL CONFIGURATION.
Thedisplay now shows “00”. Now you can directly select the presets, as described
in ch. 2.1.2.

Содержание

Похожие устройства

Скачать