Behringer FCB1010 [8/16] Detailed preset programming
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Behringer FCB1010 [8/16] Detailed preset programming

Behringer FCB1010 [8/16] Detailed preset programming
8 MIDI FOOT CONTROLLER FCB1010 User Manual
Switch MIDI Function Action
1 PRG CHG 1 Program change command #1
2 PRG CHG 2 Program change command #2
3 PRG CHG 3 Program change command #3
4 PRG CHG 4 Program change command #4
5 PRG CHG 5 Program change command #5
6 CNT 1 Controller 1
7 CNT 2 Controller 2
8 EXP A Expression Pedal A
9 EXP B Expression Pedal B
10/0 NOTE Transmits a MIDI note
Tab. 2.3: Footswitch assignment in PRESET programming mode
◊ MIDI channel adjustment for the respective MIDI functions is not done
during preset programming; it is done in GLOBAL CONFIGURATION on
MIDI FUNCTION page (see ch. 2.2.2).
• Conrm your selection with UP/ENTER, in order to start programming the
selected MIDI function, or cancel with DOWN/ESCAPE. Use footswitches
1 through 10/0 or EXPRESSION PEDAL A to enter the parameter values of
yourchoice.
• If you have selected PROGRAM CHANGE as the MIDI function to be edited,
you can now enter a program change number from 1 through 128 and
conrm your selection with UP/ENTER.
• If you have selected CNT1 or CNT2, you can now enter the number of the
controller to be sent (0 through 127) when you press the corresponding
footswitch. After conrming your selection with UP/ENTER you can select a
controller value (0 through 127). Conrm your selection with UP/ENTER.
• If you have selected EXP A or EXP B, you can now enter the controller
number the EXPRESSION PEDAL of your choice is aimed to send values for.
Conrm your selection with UP/ENTER and enter the lower value (pedal up).
Conrmwith UP/ENTER.
• Afterwards, enter the upper value (pedal pressed down completely)
andconrm once again with UP/ENTER.
◊ Please keep in mind that the first controller value always has to be
lower than the second controller value!
◊ You can quit the programming mode at any time by means of a long
press on DOWN. Any confirmed entries will be stored with the currently
selected PRESET.
◊ How to program the NOTE function is explained in chapter 2.4.6.
2.4 Detailed PRESET programming
2.4.1 Preset copy function
The preset copy function copies an already programmed preset to a new preset of
your choice. This saves you time, since you do not have to repeat all adjustments
for each newly programmed preset.
• Activate CONFIG in the GLOBAL CONFIGURATION (see chapter 2.2).
• Now, press footswitch 5 to activate the copy function. The VALUE 1 LED lights
up. The number in the display and the footswitch LED start ashing.
• Enter the number of the preset you wish to copy and conrm your selection
with UP/ENTER. The VALUE 2 LED lights up. The number in the display and
the footswitch LED start ashing.
◊ Presets 1 - 10 are stored in bank 0, presets 11 - 20 in bank 1, and so on.
• Enter the target preset and conrm your selection with UP/ENTER, or cancel
with DOWN/ESCAPE.
• If you want to copy further presets, please press footswitch 5 again.
Pressand hold DOWN/ESCAPE to quit the GLOBAL CONFIGURATION.
2.4.2 Programming switches
• Select the PRESET you wish to edit.
• Press DOWN for more than 2.5 sec to enter PRESET programming mode.
Thegreen SWITCH 1/SWITCH 2 LED in the display starts ashing.
• Enable/disable the SWITCHES using footswitches 1 and/or 2 and conrm your
selection with UP/ENTER. The corresponding footswitch and SWITCH LEDs
light up.
• Exit PRESET programming mode through keeping the DOWN/ESCAPE key
for a few seconds, or press the UP/ENTER key in order to get to the next
page, where you can edit various MIDI functions for the preset selected at
thebeginning.
2.4.3 Programming program changes
• Select the PRESET you wish to edit.
• Keep the DOWN/ESCAPE key pressed longer than 2.5 sec. to get to the
programming mode. The green SWITCH 1/SWITCH 2 LED in the display
startsashing.
• Use the UP/ENTER key to get to the next page. The SELECT LED in the display
is lit.
◊ To program a MIDI function, you have to first activate it. Individual
MIDI functions are activated by keeping the corresponding keys
pressed for a few seconds. Active MIDI functions are indicated by a
permanently lit footswitch LED.
• Select the PROGRAM CHANGE you wish to program for the selected
PRESET by briey pressing the respective footswitch (footswitches 1 to 5).
Thefootswitch LED blinks.
• Conrm your selection by pressing UP/ENTER. The NUMBER LED in the display
lights up.
• Enter the program change command (1 bis 128) via the footswitch or
expression pedal A.
• Conrm your selection by pressing UP/ENTER or cancel by pressing
DOWN/ESCAPE. The SELECT LED in the display lights up.
• Select an additional MIDI function you wish to edit or exit the PRESET
programming mode by keeping the DOWN/ESCAPE key for a few seconds.
2.4.4 Programming CONTROL CHANGES
• Select the PRESET you wish to edit.
• Keep DOWN pressed for more than 2.5 sec to enter PRESET programming
mode. The green SWITCH 1/SWITCH 2 LED in the display starts ashing.
• Use the UP/ENTER key to get to the next page. The SELECT LED in the display
lights up.

Содержание

Похожие устройства

Скачать