LE MAITRE MVS HAZER [11/11] Warranty

The machine is placed on a suitable work surface.

The machine has been allowed to cool for at least 10 minutes.

The use of correct tools for panel removal and tube replacement.

The ability to be able to confirm suitability of use after the replacement has been

made.

This tube is sited underneath the fan inlet side panel. Removing this side panel will

allow easy access and replacement should it ever be required. Two M8 nuts secure

the ends of the tube and a quick connector completes the temperature sensor

connection. The nuts secure the tube both physically and electrically. It is important

that they should not be over tightened whilst at the same time, tight enough to

provide a good electrical connection.

Push on silicon tubing supplying the fluid and air drive is easily removed from the

input end. It is best to use ‘nyties’ since this will add security to the fluid and air

supply connections.

After tube replacement, and having checked that all parts are as they should be, the

tube should be run through a ‘bedding in’ period, where any tendency to

occasionally output very fine fluid particles (if any), will clear.

Warranty

The Le Maitre MVS hazer is sold with a one year’s warranty, which includes parts

and labour from the date of purchase. This warranty covers manufacturing defects,

providing that the unit has been regularly serviced by an authorized agent and has

only used genuine Le Maitre fluid.

Le Maitre Ltd considers all of its products to be safe for use in the application it was

intended. Le Maitre Ltd takes no responsibility for misuse or incorrect use. Always

refer to the equipment owner’s manual for proper use, and be aware of local

legislation governing the products use.

Unit 6, Forval Close, Wandle Way, Mitcham, Surrey, CR4 4NE. ENGLAND.

Tel: 020 8 646 2222 Fax: 020 8 646 1955

Web: www.lemaitreltd.com

http://acctech.ru/cat/dym_machine_generator/