Husqvarna 535i XP 14 [20/32] To clean the cooling system

To do a check of the keypad

1. Start the product. See

To start the product on page

2. Press the start/stop button again.

3. Make sure that the product stops when you press

and hold the button. The green LED will go off.

To do a check of the battery and the

battery compartment

1. Clean the battery and the battery compartment with

a soft brush.

2. Make sure that the cooling slots and battery

connectors are clean.

3. Make sure that the battery is not damaged and there

are no other defects, such as cracks.

To do a check of the battery charger

1. Make sure that the battery charger and the power

supply cord is not damaged. Look for cracks and

other defects.

To clean the cooling system

The product has a cooling system that keeps the

temperature of the product as low as possible.

The cooling system includes an air intake on the left side

of the product and a fan on the motor.

1. Clean the cooling system with a brush weekly or

more frequently if necessary.

2. Make sure that the cooling system is not dirty or

blocked.

CAUTION:

A dirty or blocked cooling

system can cause the product to

become too hot. This causes damage to

the piston and cylinder.

To sharpen the saw chain

Information about the guide bar and saw chain

Replace a worn or damaged guide bar or saw chain with

the guide bar and saw chain combinations

recommended by Husqvarna. This is important in order

to keep the safety functions of the cutting equipment.

See

Accessories on page 29

, for a list of replacement

bar and chain combinations that we recommend.

959 - 004 - 22.01.2019