Husqvarna 535i XP 14 [26/32] Troubleshooting

Maintenance Before

use

Weekly Monthly

Sharpen the saw chain. Do a check of its tension and condition. Do a check for

wear on the drive sprocket and replace is necessary.

Clean the air inlet on the product. X

Make sure that the screws and nuts are tight. X

Make sure that the keypad works correctly and that it is not damaged. X

Use a file to remove burrs from the edges of the guide bar. X

Do a check of the connections between the battery and the product. Do a check

of the connection between the battery and the battery charger.

Empty and clean the oil tank. X

Blow through the product and battery cooling slots gently with compressed air. X

Troubleshooting

Keypad

Possible fault codes on the keypad of the product.

LED display

Possible faults Possible action

Warning indicator flashing. Chain brake engaged. Pull back the front hand guard to re-

lease the chain brake.

Temperature deviation. Allow the product to cool down.

Overload. Cutting attachment jam-

med.

The cutting attachment is jammed.

Release the cutting attachment.

The power trigger and the activate

button are pressed at the same time.

Release the power trigger and the

product is active.

Green activate LED flashing. Low battery voltage. Charge the battery.

Warning indicator lit. Service. Turn to your servicing dealer.

Battery

Problem

Possible faults Possible solution

Green LED flashes. Low battery voltage. Charge the battery.

Red error LED flashes. The battery is empty. Charge the battery.

Temperature deviation. Use the battery in temperatures between

-10°C (14°F) and 40°C (104°F).

Overvoltage. Remove the battery from the battery charger.

26 959 - 004 - 22.01.2019