Husqvarna 535i XP 14 [25/32] Maintenance schedule

3. Compare the saw chain with a new saw chain to

examine if the rivets and links are worn. Replace the

saw chain when the length of the cutting teeth has

worn down to 4 mm/ 0.16 in.

To do a check of the guide bar

Do a check of the guide bar regularly.

1. Examine if there are burrs on the edges of the guide

bar. Remove burrs with a file if necessary.

2. Examine the groove in the guide bar for wear.

Replace the guide bar if necessary.

3. Examine if the guide bar tip is rough or very worn.

Hollow shapes on the guide bar tip is a result of bad

saw chain tension.

4. Turn the guide bar daily to extend its life cycle.

Maintenance schedule

WARNING: Remove the battery before you

do maintenance.

The following is a list of the maintenance steps that you

must do on the product. See

Maintenance on page 18

for more information.

Maintenance

Before

use

Weekly Monthly

Clean the external parts of the product. X

Make sure that the power trigger and the power trigger lockout function correctly

from a safety point of view.

Clean the chain brake and make sure that it operates safely. Make sure that the

chain catcher is not damaged. Replace it if necessary.

Turn the guide bar for more equal wear. Make sure that the lubrication hole in

the guide bar is not clogged. Clean the bar groove.

Make sure that the cutter and cutter guard have no cracks and that they are not

damaged. Replace the cutter or cutter guard if they have cracks or if they have

been exposed to impact.

Make sure that the guide bar and saw chain have sufficient oil. X

Do a check of the saw chain. Look for cracks and make sure that the saw chain

is not rigid or unusually worn. Replace if necessary.

959 - 004 - 22.01.2019 25