Husqvarna 535i XP 14 [21/32] General information about how to sharpen the cutting teeth

• Length, in/cm.

• Number of teeth on bar tip sprocket (T).

• Chain pitch, in. The distance between the drive links

of the saw chain must align with the distance of the

teeth on the bar tip sprocket and drive sprocket.

PITCH =

• Number of drive links. The number of drive links is

decided by the length of the bar, the chain pitch and

the number of teeth on the bar tip sprocket.

• Bar groove width, in/mm. The groove in the guide

bar must align with the width of the chain drive links.

• Chain oil hole and hole for chain tensioner. The

guide bar must align with product.

• Drive link width, mm/in.

General information about how to sharpen the

cutting teeth

Do not use a blunt saw chain. If the saw chain is blunt,

you must apply more pressure to push the guide bar

through the wood. If the saw chain is very blunt, there

will be no wood chips but sawdust.

A sharp saw chain eats through the wood and the wood

chips becomes long and thick.

The cutting tooth (A) and the depth gauge (B) together

makes the cutting part of the saw chain, the cutter. The

difference in height between the two gives the cutting

depth (depth gauge setting).

When you sharpen a cutting tooth, think about the

following:

• Filing angle.

959 - 004 - 22.01.2019