Coolfort CF-2010 [4/16] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Coolfort CF-2010 [4/16] English

Coolfort CF-2010 2010-CF-01 [4/16] English
4
ENGLISH
FAN  CF-2010
The fan is intended for artificial ventilation of the room.
DESCRIPTION
1. Control panel
2. Front panel (with an air outlet)
3. Rear panel (with an air inlet grid)
4. Base
5. Power cord
6. Fixator locks
7. Lower part of the unit body
8. Stand footing groove
9. Connector clamps
10. Latches
11. Power cord duct
12. Body
Control panel and RC
13. «MODE» airflow mode selection button
14. «TIMER» setting button
15. « » ON/OFF button
16. «Speed» speed mode selection button
17. «OSC» oscillation mode ON/OFF button
18. Display
19. Remote control (RC)
SAFETY PRECAUTIONS
Before using the fan, read this instruction manual carefully
and keep it for further reference.
• Use the unit for its intended purpose only as specified
in this manual.
• Mishandling the unit can lead to its breakage and cause
harm to the user or damage to his/her property.
• Before switching the unit on for the first time make sure
that your home mains voltage corresponds to the unit
operating voltage.
• Before using the fan examine the power cord closely
and make sure that it is not damaged. If you find that the
power cord is damaged, do not use the unit.
• Do not use the fan outdoors.
• Place the unit on a flat, dry and steady surface away from
sources of heat or open flame.
• Do not use the unit near containers filled with water,
next to a kitchen sink, in wet basements or near a swim-
ming pool.
• Do not immerse the fan, power cord and power plug into
water or any other liquids.
• Do not touch the unit body and the power plug with wet
hands.
• If the fan falls into water, unplug it before touching it and
only then you may take the fan out of water. Apply to the
nearest authorized service center for testing or repairing
the unit at the contact addresses given in the warranty
certificate and on the website www.coolfort.ru.
• Make sure that the power cord does not contact with hot
surfaces and sharp furniture edges.
• Do not switch the unassembled fan on.
• Do not insert any foreign objects into the openings of
the fan protective grids to avoid injuries or unit damage.
• Do not touch the rotating blades during the fan opera-
tion.
• Do not place the fan near curtains or house plants.
• It is not recommended to stay under the air flow coming
from the fan for a long time (especially for children and
elderly people).
• Never leave the operating unit unattended.
• Unplug the fan before cleaning and when you do not use
the unit or before moving it to a new place.
• When unplugging the fan pull the plug but not the cord.
• Clean the unit regularly.
• Do not leave children unattended to avoid them using
the unit as a toy.
• For children safety reasons do not leave polyethylene
bags used as packaging unattended.
Attention! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
• Do not allow children to touch the unit and the power
cord during the unit operation.
• The unit is not intended to be used by people with physi-
cal, sensory or mental disabilities (including children) or
by persons lacking experience or knowledge if they are
not under supervision of a person who is responsible for
their safety or if they are not instructed by this person on
the usage of the unit.
• Do not use the fan if the blades, the power cord or the
power plug are damaged, if the fan works improperly,
after it was dropped or was damaged in some other
way.
• If the power cord is damaged, it should be replaced by
the manufacturer, a maintenance service or similar qual-
ified personnel to avoid danger.
• Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
has fallen, unplug the unit and apply to any authorized
service center at the contact addresses given in the war-
ranty certificate and on the website www.coolfort.ru.
• Transport the unit in the original package.
• Keep the unit in a dry cool place out of reach of children
and people with disabilities.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AR-
EAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After the unit transportation or storage at low tem-
perature keep it for at least three hours at room tem-
perature before switching on.
FAN ASSEMBLING
The fan is supplied disassembled. Do not connect the unit
to the mains, if it is not completely assembled.
• Unpack the unit and remove any stickers that can pre-
vent its operation.
• Check the unit for damages; do not use it in case of
damages.
• Assemble the base (4): match the clamps (9) on one
half of the base (4) with the latches (10) on the other
half of the base (4) and connect them until click-
ing. Pass the power cord through the stand footing
groove (8).
• Install the lower part of the fan body (7) into the assem-
bled base (4), make sure that the fixator locks (6) on the
body match with the openings in the base (4), and con-
nect them until clicking.
• Fix the power cord (5) in the power cord duct (11).
USAGE
Before using the unit for the first time, make sure that the
voltage in your mains corresponds to the unit operating
voltage.
• Insert the power plug into the mains socket.
• Press the « » ON/OFF button (15), the unit will turn on
in speed mode «I».
• Select the airflow speed by pressing the «Speed» button
(16) repeatedly on the control panel (1) or the button (16)

Содержание

Похожие устройства

Скачать