Bosch Zamo III Set 3 адаптера 0.603.672.701 [34/502] Fitted adapter c flashes display shows err meas urement not possible

34 | English

1 609 92A 454 | (14.06.2018) Bosch Power Tools

Press the measuring button (1) twice in quick succession

again to display the last two measurements.

If no button on the measuring tool is pressed for approx.

5mins, the measuring tool will automatically switch itself off to

preserve battery life.

u Do not direct the laser beam at persons or animals and

do not stare into the laser beam yourself (even from a

distance).

Practical advice

General advice

The reception lens (7) and the laser beam output (8) must not

be covered during the measuring process.

The measurements are taken at the centre of the laser beam,

even when the laser is pointed at surfaces diagonally.

Errors – causes and corrective measures

Cause Corrective measure

Temperature warning (b) flashing, display shows "err",

measurement not possible, measuring tool switches off

automatically after five seconds

Measuring tool is outside of

the operating temperature

range of – 10 °C to +40 °C.

Wait until the measuring tool

has reached operating tem-

perature. Then switch the

measuring tool back on.

All symbols flash, measurement not possible

Measuring tool faulty Check the batteries and re-

place them if necessary.

Fitted adapter (c) flashes, display shows "err", meas-

urement not possible

Adapter error: