Zalman RESERATOR 1 V2 [15/18] Reserator 1 v2

English

RESERATOR 1 V2

※

The specifications of any product may change without prior notice to improve performance.

5) Take out the Power Cable

Pull the Water Pump power cable out

through the Cable Hole.

6) Remove the Cable Fitting

Take the Cable Fitting out of the hole as

shown in the diagram by using a screwdriver

or an awl.

7) Remove the Integrated Water Pump

Pull the Water Pump off the Sink Base

as shown in the diagram.

8) Put on the Sealing Bolt B

After removing the Cable Fitting, screw

on the Sealing Bolt B. Fasten tightly.

If this is not done properly, it may cause

leakage.

9) Reassemble the Sink Base

After all the steps are taken, reattach

the Sink Base to the main body firmly.

Take proper care in doing this as

leakage may result if not done correctly.

Sealing Bolt A

Water Pump

Power Cable

Cable Hole

Cable Fitting

Water Pump

Cable Fiting

Sealing Bolt B