Zalman RESERATOR 1 Plus [2/18] Installation notes

RESERATOR 1 Plus

www.zalman.co.kr www.zalmanusa.com

1. Make sure that the power source’s output voltage and frequency are compatible with

the power input requirements of the water pump before installing. (Input voltage and

frequency of the water pump are shown on the box and sink cover.)

2. Do not place in dusty or humid conditions, under direct sunlight, or near a heat source

such as a room heater.

3. Do not drop or subject to excessive force.

4. CPU socket compatibility must be checked.

5. Familiarize yourself with this manual.

6. D

o not mix any contaminant with the coolant when filling, for it may cause product failure.

7. Check for leaks on water block(s) before the installation.

Installation Notes

1. Use a power strip with a power switch, and connect both PC and Reserator 1 Plus to

the power strip to allow simultaneous power ON/OFF switching.

2. Always turn on the water pump first before using the system.

3. If the coolant isn’t circulating or the pump is making a strange noise, turn the PC OFF

immediately.

4. Do not place any objects on the product.

5. Install on a flat surface with no vibration or slant, and do not tilt or lay horizontally.

6. Use distilled water for coolant, regularly check the amount of coolant, and replenish

as needed.

7. If a leak is found, turn off the system immediately and examine the problem before

using the system again.

8. I

f the system will not be used for an extended period of time, turn the Water Pump OFF.

9. When moving the system, separate the reserator from the PC case before moving.

10. Do not let any air bubbles form in the Water Block and tubes during operation.

11. Always check that the water pump is functioning properly.

Operational Notes

Zalman Tech Co., Ltd. is not responsible for any damages due to external causes,

including but not limited to, improper use, problems with electrical power, accident,

neglect, alteration, repair, improper installation, or improper testing.

Disclaimer

Installation and Operational Notes