Clatronic PP 3401 C [22/40] After use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Clatronic PP 3401 C [22/40] After use

Clatronic PP 3401 C [22/40] After use
ENGLISH
22
After Use
• To switch the device off, first turn the temperature regulator
to 0 (Off) and remove the plug from the socket.
• Do not remove the thermostat from the device until the
device has cooled down, as the temperature sensor is still
very hot after use.
Cleaning
WARNING:
• Always pull out the plug from the mains socket before
cleaning and wait until the unit has cooled down.
• Do not use any wire brush or other abrasive objects.
CAUTION:
• Do not use any acidic or abrasive detergents.
• Under no circumstances should the device be immersed
in water for cleaning.
Pan
• Please remove any food residues while they are still warm
with a damp cloth or paper towel. In the case of stubborn
residues the pan should be reheated with a little water.
• Wash off the pan with a soft sponge and soapy water.
Then wipe with clear water and dry thoroughly with a soft
cloth. After drying please apply a thin film of edible oil to the
surface.
Lid
Clean the lid with a soft sponge and a little washing-up liquid.
Thermostat
Please clean the thermostat with a soft paper towel or a soft try
cloth.
WARNING:
• Never clean the regulator with damp items, as otherwise
this might result in an electric shock or fire.
• Never immerse the cable loom in water!
Technical Data
Model: ...............................................................................PP 3401
Power supply: ............................................... 220-240 V, 50/60 Hz
Power consumption: ..........................................................1500 W
Protection class: ........................................................................... Ι
Net weight: .........................................................................2,00 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Scope of delivery
Pan
Glass lid
Thermostat
Knob
Collar
1 large screw with washer
2 heat shields
4 small screws
Before Initial Use
• Remove the packaging.
• Operate the appliance without the lid for approximately
5 min on the highest setting (see „Initial Operation”).
NOTE:
Any smoke or smells produced during this procedure are
normal. Please ensure sufficient ventilation.
• We recommend that you clean the lid and the pan as
described under „Cleaning“.
Assembly
1. Mount the knob on the glass lid:
• To do this, place the knob and the ring collar on a flat
surface.
• Place the lid on it upside down.
• Insert the screw with the washer from the inside through
the lid and tighten the knob by hand.
2. Mount the heat shields on to
the handles:
• Under each of the
handles you can see
two drill holes.
• Hold one heat shield in
each case between the
pan and handle.
• Insert the screws into
the drill holes and screw
the heat shields into
place.
Initial Operation
Place the device on a heat-resistant surface.
1. Please ensure that the temperature regulator is turned to
0 (Off) and insert it into the socket of the thermostat. The
power socket is on the side of the device.
CAUTION:
If the thermostat is not
inserted correctly, this may
lead to abnormal heating,
of which the consequence
may be damage or acci-
dents. You should therefore
ensure that the thermostat
is inserted correctly.
2. Connect the device to a properly installed 230 V, 50 Hz
power socket.
3. et the temperature control according to what you intend to
do:
Adjustment
Temerature
adjustment
in °C approx.
Use
1 Keeping warm
2 over 100 °C
Fried food,
hamburgers
3-4 150° - 200 °C
Pancakes, scrambled
eggs, ham, bacon
5 240 °C Roasting
NOTE:
The device has reached the correct temperature when the
control lamp on the thermostat goes off. During operation the
control lamp goes on from time to time to show that the correct
temperature is being maintained.
Using the unit
• The Party Pan should be preheated for approximately five
minutes. When the control lamp goes off, the pan is ready
for operation.
• The cooking time depends on the type and quantity of
food that is to be cooked as well as the degree of cooking.
Please base these times on your own experience.
• When turning the food that is being cooked, please use
wooden or Teflon utensils so as not to damage the non-stick
layer.
• When cooking is finished the food may be kept warm by
turning the controls to 1.
WARNING:
• The Party Pan is hot during use!
• Hot steam is emitted from the lid.
05-PP 3401.indd 22 09.12.10 10:49

Содержание

Похожие устройства

Скачать