Suunto Zoop [20/73] Dive planning plan

18
Dive Planning [PLAN]3.1.3.
To enter Planning Mode, press the PLAN button at any time during Surface
Mode. After showing the text “PLAN” (Fig. 3.5.), the display will show the no-
decompression limit for the depth of 9 m [30 ft]. By pressing the down arrow
() (TIME) button, the dive computer will calculate and show the next deeper
no-decompression limits in 3 m [10 ft] increments ending at 45 m [150 ft]. By
pressing the up arrow () (PLAN) button, the next shallower depth will be
shown again.
The Planning Mode is canceled by pressing the SMART (QUIT) button.
NOTE! The Planning mode is disabled in Error mode (see section 3.8. “Error
Conditions”).
Higher Altitude and conservative Personal Adjustment Modes will shorten the
no-decompression time limits. These limits at different Altitude and Personal
Adjustment Mode selections are shown in Table 6.1 and 6.2 in section 6.1.
“Operating Principles”.
The Planning mode also accounts for the following information from previous
dives:
any calculated residual nitrogen
all dive history for the past four days
oxygen toxicity (Nitrox mode)
The no-decompression times given for different depths will therefore be shorter
than before your first “fresh” dive.
DIVE NUMBERING SHOWN DURING DIVE PLANNING
Dives belong to the same repetitive dive series if the instrument was still counting
down the no-fly time at the beginning of the dive.
The surface interval must be at least 5 minutes for a dive to be considered a repe-
titive dive. Otherwise, it is considered a continuation of the same dive. The dive
number will not change and the dive time will continue where it left off (see also
section 3.5.2. “Dive Numbering”).
User Definable Functions and Alarms3.1.4.
The ZOOP has several user definable functions and depth and time related alarms
that you can set according to your personal preference.

Содержание

Скачать