![Suunto Vyper Air [19/65] Installing the wireless transmitter](/img/pdf.png)
Suunto Vyper Air [19/65] Installing the wireless transmitter
In order to use the transmitter, the wireless integration needs to be enabled in your Suunto
Vyper
AIR
's settings.To enable or disable the wireless integration refer to Section 5.8.10.
Setting the tank pressure.
5.7.1. Installing the wireless transmitter
When purchasing the Suunto Vyper
AIR
, we strongly recommend that you have your Suunto
representative attach the transmitter to the first stage of your regulator.
However, if you decide to attach it yourself, do the following:
1.
Remove the high pressure (HP) port plug on the first stage of your regulator using an
appropriate tool.
2.
Thread the high pressure transmitter of the Suunto Vyper
AIR
into the HP port of your
regulator with your fingers. DO NOT OVERTIGHTEN! Maximum torque is 6 Nm/4.4
lbsft or 53 lbsin.The seal is based on a static O-ring, not force!
3.
Attach the regulator to the scuba cylinder and slowly open the valve. Check for leaks
by submerging the regulator first stage in water. If leaks are detected, check the
condition of the O-ring and sealing surfaces.
5.7.2. Pairing and code selection
In order to receive wireless data, the transmitter and the Suunto Vyper
AIR
need to be
paired. During the pairing procedure, the transmitter and dive computer select a common
transmission code.
The transmitter is activated when the pressure exceeds 15bar/218 psi and it then starts
sending pressure data together with a code number. During the pairing procedure, the
Suunto Vyper
AIR
stores the code number and starts displaying pressure values that are
received with that code.This coding procedure inhibits data mix-up from other divers also
using a Suunto Vyper
AIR
transmitter.
When there is no stored code, the Suunto Vyper
AIR
displays “cd:--” and receives data
with lowered sensitivity from a very short distance only. By taking the Suunto Vyper
AIR
close to the transmitter, it will store the received code and start receiving with full sensitivity
and display data received with this code only.The code is stored until you reset it manually.
To pair the transmitter and the Suunto Vyper
AIR
dive computer:
1.
Make sure that the transmitter is properly attached to the regulator’ s HP port and that
the regulator is properly attached to the cylinder.
2.
Ensure that the Suunto Vyper
AIR
is turned on, and that the wireless integration is
enabled in the Suunto Vyper
AIR
settings (HP set ON, see Section 5.8.11. Setting the
HP code).The Vyper
AIR
should display “cd:--” in the lower left corner of the alternative
display.
3.
Slowly open the cylinder valve fully and pressurize the regulator.The transmitter starts
transmitting when the pressure exceeds 15 bar/218 psi.
4.
Take the Suunto Vyper
AIR
wrist unit close to the transmitter.The unit will then quickly
display the selected code number and then start displaying the transmitted cylinder
pressure.The wireless transmitter indicator is displayed every time the Suunto Vyper
AIR
receives a valid signal.
WARNING
If there are several divers using Suunto Vyper
AIR
diving instruments
with wireless transmission, always ensure that each diver is using a
different code before starting the dive.
Reset the transmitter's code manually, see Section 5.8.11. Setting
the HP code.
The transmitter will then select a new code. The Suunto Vyper
AIR
must be in “cd:--“ mode to pair on the new code.This procedure can
be used if, for example, your dive buddy has the same code and you
need to change it.
19
Содержание
- User s guide 1
- Table of contents 3
- Welcome to the world of suunto diving instruments 5
- Warnings cautions and notes 6
- Button symbols and functions 9
- Navigating in the menus 9
- Suunto at a glance 9
- Getting started with your suunto vyper air 11
- Setting the alarm 11
- Setting the date 11
- Setting the time 11
- Time mode settings 11
- Ac water contacts 12
- Setting the backlight 12
- Setting the tones 12
- Setting the units 12
- Compass display 13
- Learning how to use your compass 13
- Locking a bearing 13
- Calibration 14
- Compass settings 14
- Declination 15
- Declination you can compensate for the difference between true north and magnetic north by adjusting the compass declination the declination can be found for example from sea charts or topographic maps of the local area 15
- If the calibration fails several times in a row it is possible that you are in an area with sources of magnetism such as large metal objects power lines or electric appliances move to another location and try to calibrate the compass again if the calibration continues to fail contact an authorized suunto service center 15
- Time out 15
- Time out you can set the compass time out to 1 3 or 5 minutes after the set time has passed from the latest button press the dive computer returns to the time or dive mode from the compass mode 15
- You can exit the compass mode also by long pressing the select button 15
- Before diving 16
- Dive computer limitations 16
- Emergency ascents 16
- The suunto rgbm deep stop algorithm 16
- Audible and visual alarms 17
- Nitrox 17
- Error conditions 18
- Wireless transmission 18
- Installing the wireless transmitter 19
- Pairing and code selection 19
- Dive mode settings 20
- Transmitting data 20
- Setting the depth alarm 21
- Setting the dive time alarm 21
- Setting the nitrox values 21
- Setting the personal altitude adjustments 22
- Setting the safety stops deep stops 22
- Setting the sample rate 22
- Setting the hp code 23
- Setting the rgbm values 23
- Setting the tank pressure 23
- Setting the tank pressure alarm 23
- Setting the units 23
- Accessing dive mode 24
- Activation and pre checks 24
- Dive mode activation 24
- Battery power indication 25
- Diving at altitude 25
- Personal adjustments 26
- Mandatory safety stops 27
- Recommended safety stops 27
- Safety stops 27
- Deep stops 28
- Basic dive data 29
- Diving 29
- Diving in air mode diveair 29
- Bookmark 30
- Tank pressure data 30
- Ascent rate indicator 31
- Decompression dives 31
- Safety stops 31
- Ceiling ceiling zone floor and decompression range 32
- Display above the ceiling 33
- Display above the floor 33
- Display at the ceiling zone 33
- Display below the floor 33
- Before diving in nitrox mode 34
- Default nitrox settings 34
- Diving in nitrox mode divenitrox 34
- Oxygen displays 34
- Gas change and multiple breathing gas mixes 35
- Oxygen limit fraction olf 35
- Diving in gauge mode divegauge 36
- After diving 37
- Dive numbering 37
- Repetitive dive planning 37
- Surface interval 37
- Dive planning mode plannodec 38
- Flying after diving 38
- Plan mode 38
- Dive numbering shown during dive planning 39
- Dive simulator 39
- Simulation mode plansimulator 39
- Dive logbook memlogbook 40
- Memory mode 40
- Dive history memhistory 41
- Suunto dive manager sdm 42
- Www suuntosports com and suunto diving world at www suunto com diving 42
- Care and maintenance of my suunto diving computer 44
- Battery kit 46
- Battery replacement 46
- Replacing the battery 46
- Required tools 46
- Replacing the transmitter battery 48
- Required tools 48
- Transmitter battery kit 48
- Wireless transmitter battery replacement 48
- Technical data 50
- Technical specifications 50
- No decompression limits 52
- Suunto rgbm adaptive decompression 52
- Altitude diving 53
- Oxygen exposure 53
- Copyright 55
- Intellectual property 55
- Patent notice 55
- Trademark 55
- Disclaimers 56
- User s responsibility 56
- Suunto limited warranty for suunto diving computers and suunto diving computer accessories 57
- Disposal of the device 60
- Glossary 61
- Copyright 63
- Customer service contacts 63
- Two year warranty 64
- Www suunto com 65
Похожие устройства
- Yamaha DGX-630 Инструкция по эксплуатации
- Efco МZ 2060C GX160 Инструкция по эксплуатации
- D-Link DSL-2540/BRU Инструкция по эксплуатации
- Soehnle 65106 Инструкция по эксплуатации
- Elikor Сапфир 60 Инструкция по эксплуатации
- LG DT-S585NYG Инструкция по эксплуатации
- Suunto Vyper Инструкция по эксплуатации
- Texas LX550B 90045544 Инструкция по эксплуатации
- Yamaha EZ-150 Инструкция по эксплуатации
- D-Link DSL-510 Инструкция по эксплуатации
- LG DA-5620 Инструкция по эксплуатации
- Dekok UKA-1222 Инструкция по эксплуатации
- Zelmer 986.83 Инструкция по эксплуатации
- Suunto Stinger Инструкция по эксплуатации
- Yamaha EZ-250i Инструкция по эксплуатации
- D-Link DSL-524T Инструкция по эксплуатации
- Partner PFT85-800R 9666698-01 Инструкция по эксплуатации
- Dekok UKA-1224 Инструкция по эксплуатации
- Elikor Davoline 50 Инструкция по эксплуатации
- JVC TH-V70R Инструкция по эксплуатации
Скачать
Случайные обсуждения