Suunto Vyper Air [22/65] Setting the safety stops deep stops

Превью страниц Страница 22 / 65

ADJUST WITH

UP AND DOWN

BUTTONS.

ACCEPT WITH

SELECT BUTTON.

ADJUST WITH

UP AND DOWN

BUTTONS.

ACCEPT WITH

SELECT BUTTON.

NOTE

If MIX2 is set ON, settings for all mixes are stored until changed. If

MIX2 has an oxygen content of 22% or greater, settings for all mixes

are stored until changed.

5.8.4. Setting the personal/altitude adjustments

The current Altitude and Personal Adjustment settings are displayed in the startup screen

when entering the DIVE mode. If the mode does not match the altitude or personal

conditions (see Section 5.9.4. Diving at altitude and Section 5.9.5. Personal adjustments),

it is imperative that you enter the correct selection before diving. Use Altitude Adjustment

to select the correct altitude and use Personal Adjustment to add an extra level of

conservatism.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.5. Setting the sample rate

The sample rate controls how often the depth, time, tank pressure, and water temperature

is stored in the memory.

You can set the dive profile sample rate to 1, 10, 20, 30, or 60 seconds.The factory default

setting is 20 seconds.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.6. Setting the Safety Stops/Deep Stops

The Deep Stop setting allows you to view Deep Stops. If Deep Stops are set to OFF, only

the traditional Safety Stop calculation is used.

If set to ON, iterative Deep Stops will be prompted as well. The length of the individual

Deep Stops can be set to 1 or 2 minutes.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.