Suunto Vyper Air [23/65] Setting the units

Превью страниц Страница 23 / 65

5.8.7. Setting the RGBM values

For certain divers and diving conditions, it may be desirable to set the attenuated RGBM

mode.The selection is displayed during the DIVE mode startup.The options are full RGBM

effects (100%), and attenuated RGBM (50%).

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.8. Setting the units

Use Unit Settings to choose between metric (meters/celsius/bar) and imperial

(feet/fahrenheit/psi) units.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.9. Setting the tank pressure alarm

The tank pressure alarm can be set "ON" or "OFF" and in the range of 10 - 200 bar.The

alarm is the secondary cylinder pressure alarm point. The alarm is activated when the

tank pressure drops below the set limit. The 50 bar alarm, however, is fixed and cannot

be changed.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.10. Setting the tank pressure

The wireless transmission can be set “ON” or “OFF” depending whether the optional

wireless pressure transmitter is used or not. No cylinder pressure-related data is shown,

nor data reception made, when this selection is “OFF”.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

5.8.11. Setting the HP code

The HP Code setting allows you to verify the selected code and to erase the stored code.

It also enables re-pairing if necessary.