Zyxel NWA3160-N [14/152] Telnet

Chapter 1 Command Line Interface

NWA3000-N Series CLI Reference Guide

4 You may be prompted to authenticate your account password, depending on the type of

device that you are logging into. Enter the password and click OK.

5 If your login is successful, the command line appears and the status bar at the bottom of

the Console updates to reflect your connection state.

1.2.3 Telnet

Use the following steps to Telnet into your NWA3000-N Series AP.

1 If your computer is connected to the NWA3000-N Series AP over the Internet, skip to

the next step. Make sure your computer IP address and the NWA3000-N Series AP IP

address are on the same subnet.

2 In Windows, click Start (usually in the bottom left corner) and Run. Then type

telnet

and the NWA3000-N Series AP’s IP address. For example, enter telnet

192.168.1.2

(the default management IP address).

3 Click OK. A login screen displays. Enter the user name and password at the prompts.

" The default login username is admin and password is 1234. The username

and password are case-sensitive.