![Makita ea3202s40b [22/40] Starting the engine](/img/pdf.png)
Makita ea3202s40b [22/40] Starting the engine
![Makita ea3203s40b [22/40] Starting the engine](/views2/1175345/page22/bg16.png)
22
1
2
4
5
3
ON
Starting the engine
Do not start the chain saw until after it is completely
assembled and checked!
Move at least 3 meters / 10 feet away from the place where
the chain saw was fuelled.
Make sure you have a secure footing, and place the saw on
the ground in such a way that the guide bar and chain are
not near anything.
Actuate the chain brake (block it).
Hold the front handle rmly with one hand and press the saw
against the ground.
Hold the down rear handguard with your right foot as
shown.
Note: The Featherlight‑Start System lets you start the saw
without eort. Go through the starting procedure smoothly
and evenly.
Cold starting:
Prime the fuel pump (5) by pressing it several times until you
can see fuel in the pump.
Move the combination switch (1) up (choke position). This
also actuates the half‑throttle lock.
Pull the starter handle (2) smoothly and evenly.
CAUTION: Do not pull the starter cable more than about
50 cm/20” out, and let it back in slowly by hand.
Repeat the starting procedure twice.
Move the combination switch (1) to the central “ON” position.
Pull the starter handle smoothly and evenly again. As soon
as the engine is running, grasp the rear handle (the safety
lock button (3) is actuated by the palm of the hand) and press
the throttle trigger (4).
CAUTION: The engine must be put in idle immediately after
starting. If this is not done, the clutch can be damaged.
Now disengage the chain brake.
Warm starting:
As described above for cold starting, but before starting push
the combination switch (1) up (Choke position) and then right
away back to the middle “ON” position. This is only to engage
the half‑throttle lock. If the engine doesn’t start after 2 or 3
pulls, repeat the entire starting procedure as described for
cold starting.
NOTE: If the engine was switched o only for a short time, the
saw can be started without using the combination switch.
Important: If the fuel tank has been completely emptied
and the engine has stopped due to lack of fuel prime the
fuel pump (5) by pressing it several times until you can see
fuel in the pump.
Stopping the engine
Depress the combination switch (1).
NOTE: After being pressed down, the combination switch
will revert to the ON position again. The engine is switched
o, but can be turned on again without moving the combina‑
tion switch.
IMPORTANT: To cut o the ignition current, push the com‑
bination switch all the way down past the resistance point to
the safety position (
).
Cold start (Choke)
Warm start (ON)
Engine o
Combination switch
in safety position
(ignition current cut
o, necessary for all
maintenance, repair, and
installation work)
Содержание
- Ea3200s ea3201s ea3202s ea3203s 1
- Important 1
- Instruction manual 1
- Table of contents 2
- Thank you for purchasing a makita product 2
- Delivery inventory 3
- Symbols 3
- Safety precautions 4
- Service 8
- Packing 9
- Technical data 9
- 14 11 12 10 10
- 20 22 23 21 10
- Denomination of components 10
- Caution 11
- Mounting the guide bar and saw chain 11
- Only for models with fastening nuts on the sprocket guard 11
- Putting into operation 11
- Tightening the saw chain 12
- Checking the chain tension 13
- Retightening the saw chain 13
- Caution 14
- Mounting the guide bar and saw chain 14
- Only for the quickset guide bar 14
- Checking the chain tension 15
- Retensioning the saw chain 15
- Tensioning the saw chain 15
- Caution 16
- Mounting the guide bar and saw chain 16
- Only for models with quick ten sioner on sprocket guard tlc 16
- Tightening the saw chain 17
- Checking the chain tension 18
- Engaging the chain brake braking 18
- For all models chain brake 18
- Retensioning the saw chain 18
- Avoid skin and eye contact 19
- Caution 19
- Chain oil 19
- Fuel mixture 19
- The storage of fuel 19
- Avoid skin and eye contact 20
- Filling fuel and chain oil 20
- Follow the safety precautions 20
- Important note on bio degradable chain oils 20
- Never use waste oil 20
- Waste oil 20
- Adjusting the chain lubrication 21
- Checking the chain lubrication 21
- Cold start choke 22
- Cold starting 22
- Combination switch in safety position 22
- Engine off 22
- Starting the engine 22
- Stopping the engine 22
- Warm start on 22
- Warm starting 22
- Checking the chain brake 23
- Adjusting the carburetor 24
- Service 24
- Maintenance 25
- Mm 25 0 4 mm 25 25
- Sharpening the saw chain 25
- Chain type 092 91vg 492 91px 290 90sg 26
- Files and how to work with them 26
- Cleaning the guide bar 27
- Cleaning the inside of the sprocket guard 27
- Service 27
- Replacing the saw chain 28
- Cleaning the air filter 29
- Checking the ignition spark 30
- Checking the muffler screws 30
- Replacing the spark plug 30
- Mounting the fan housing 31
- Replacing the return spring pack 31
- Replacing the starter cable replacing the return spring pack replacing the starter spring 31
- Replacing the starter spring 31
- Cleaning the air filter compartment fan com partment 32
- Cleaning the cylinder fins 32
- Replacing the suction head 32
- Instructions for periodic maintenance 33
- Guarantee 34
- Maintenance and repair 34
- Service spare parts and guarantee 34
- Spare parts 34
- Trouble shooting 35
- Ea3200s ea3201s ea3202s ea3203s 36
- Extract from the spare parts list 36
- Ea3200s ea3201s ea3202s ea3203s 37
- Extract from the spare parts list 37
- Spare parts 37
- Ec declaration of conformity 38
- Makita corporation 40
Похожие устройства
- Makita ea3203s40b Инструкция по эксплуатации
- Makita rp0900 Инструкция по эксплуатации
- Makita hs7100 Инструкция по эксплуатации
- Makita hs6100 Инструкция по эксплуатации
- Makita dhr202rfe Инструкция по эксплуатации
- Makita ld080p Инструкция по эксплуатации
- Makita hr2811ft Инструкция по эксплуатации
- Makita jr3070ct Инструкция по эксплуатации
- Makita jr3060t Инструкция по эксплуатации
- Makita jr3050t Инструкция по эксплуатации
- Makita ddf444rfe Инструкция по эксплуатации
- Makita ddf453rfe Инструкция по эксплуатации
- Makita ddf343she Инструкция по эксплуатации
- Makita ddf453sye Инструкция по эксплуатации
- Makita bo5041 Инструкция по эксплуатации
- Makita 1002ba Инструкция по эксплуатации
- Makita hr2611ft(x5) Инструкция по эксплуатации
- Makita 5477nb Инструкция по эксплуатации
- Makita dbc3310 Инструкция по эксплуатации
- Makita dbc400 Инструкция по эксплуатации
Скачать
Случайные обсуждения