Moxa EDS-408A-1M2S-SC-T [27/109] Turbo ring dip switch

Moxa Managed Ethernet Switches Featured Functions

3-15

Turbo Ring DIP Switch

The Turbo Ring DIP Switch page allows users to disable the 4th DIP switch located on the EDS’s outer casing.

The default is enabled with Turbo Ring v2 protocol. Once the user changes the 4th hardware DIP switch

configuration to ON, the switch will start to initiate the Turbo Ring redundancy protocol based on the

configuration. The detailed description is given below:

Setting Description Factory Default

Disable the Turbo Ring DIP switch

Unchecked:

The Turbo Ring protocol will be

activated automatically when the

4th DIP switch is moved to the ON

position.

unchecked

Checked:

The Turbo Ring protocol will not be

activated automatically, regardless

of the position of the 4th DIP switch.

Set DIP switch as Turbo Ring

If the DIP switch is enabled, Turbo

Ring protocol will be enabled when

the DIP switch is moved to the ON

position.

Set DIP switch as Turbo Ring v2

If the DIP switch is enabled, Turbo

Ring v2 protocol will be enabled

when the DIP switch is moved to the

ON position.

NOTE

If the 4th DIP switch (Turbo Ring) is configured to ON, you will not be able to disable the Turbo Ring DIP switch

from the web interface, console, or Telnet.

NOTE

If you would like to enable VLAN and/or port trunking on any of the last four ports, do not use the fourth DIP

switch to activate Turbo Ring. In this case, you should use the Web, Telnet, or Serial console to activate Turbo

Ring.