Moxa EDS-408A-1M2S-SC-T [95/109] Access control rule settings

Moxa Managed Ethernet Switches Featured Functions

3-83

Changing an established access control list’s priority is easy. Moxa provides a simple interface to let you easily

adjust priority. Follow the three steps below to adjust the priority:

Step 1: Select the list

Step 2: Click the Up/Down button to adjust the sequence. The Priority Index will change with the list’s

position.

Step 3: Click the Activate button to confirm the settings.

Access Control Rule Settings

You can edit an access control list’s rules on this page. Each ACL can include up to 10 rules.

First, select the access control list you would like to edit based on the Priority Index. The Ingress/Egress Port

map will display the port settings.

NOTE

The port map here is also editable. Any change here will change the access contro

l list settings.

Access control rule displays setting options based on the filtering type used:

IP-Based

After configuring, click Add button to add the rule to the list. Then, click Activate to activate the settings.

• Action: Whether to deny or permit access if the rule criterion is met.

• Source IP Address/Source IP Address Mask: Defines the IP address rule. By using the mask, you can

assign specific subnet ranges to filter. It allows checking the source or destination of the packet. Choose

Any if you do not need to use this criteria.

• IP Protocol: Select the type of protocols to be filtered. Moxa provides ICMP, IGMP, IP over IP, TCP, and

UDP as options in this field.

• TCP/UDP Source Port, TCP/UDP Destination Port: If TCP or UDP are selected as the filtering protocol,

these fields will allow you to enter port numbers for filtering.

Once ready, click the Add button to add the rule to the list. Then, click Activate to activate the settings.