Moxa UPort 1150I [13/43] Uport 1100 series installation and configuration

UPort 1100 Series Installation and Configuration

2-4

Hardware Installation

After installing the driver, plug the converter into any upstream USB port, such as a USB port on your computer.

Windows will automatically detect the converter and begin installing the driver. When Windows finishes

installing the driver for the converter, it will detect a new COM port and will then install another driver for the

new COM port.

ATTENTION

For best results, we recommend that you install the driver before plugging the converter into the USB port.

Please refer to the previous section on Initial Driver Installation for instructions.

Windows 98/ME and Windows 2000

The following instructions are for Windows 98 and Windows 2000 systems:

1. After plugging the converter into a USB port, the Found New Hardware window should open

automatically. The USB icon indicates that the USB port is being installed. No action is required.

2. Windows 98 users may skip to the next step. On Windows 2000 systems, a window will pop up cautioning

you that this software has not passed Windows logo testing. This is a standard warning, and Moxa has

thoroughly tested the driver for safe Windows operation. Please click Yes to proceed.

3. Windows will automatically detect and install the new serial port. No further action is required