Autel Autolink AL319 Руководство пользователя онлайн [27/47] 171290

the control module to illuminate the malfunction indicator light

(MIL) when emission-related fault occurs.

 Pending Codes are also referred to as “maturing codes” or

“continuous monitor codes”. They indicate problems that the

control module has detected during the current or last driving

cycle but are not considered serious yet. Pending Codes will not

turn on the malfunction indicator lamp (MIL). If the fault does

not occur within a certain number of warm-up cycles, the code

clears from memory.

 Permanent Codes are DTCs that are "confirmed" and are

retained in the non-volatile memory of the computer until the

appropriate monitor for each DTC has determined that the

malfunction is no longer present and is not commanding the

MIL on. Permanent DTC shall be stored in non-volatile

memory and may not be erased by any diagnostic services or by

disconnecting power to ECU.

1) Use SCROLL button to select Read Codes from Diagnostic

Menu and press ENTER/Exit button.

Figure 4.3

2) Use the SCROLL button to select Stored Codes or Pending

Codes from the Read Codes menu and press the ENTER/Exit

button.

Diagnostic Menu 1/8

Read Codes

Erase Codes

Live Data

View Freeze Frame

I/M Readiness

Vehicle Info