Moxa OnCell G3150-HSPA [58/172] Gprs or gprs edge umts hspa operation mode

OnCell G3100 Series Cellular Network Settings

7-4

Option Description

Local Verify the ID against the OnCell G3100 password. The user name for the

OnCell

G3100 is fixed to “admin.”

None Authentication is not required.

Phone number: Use this field to configure the number used to dial out.

Initial string: Use this field to configure the initial string that the IP gateway will use to establish the

connection.

Connection control Connect Rule Disconnect Rule GSM

Always on/None Always on after power on None Trunk

Periodically

connect/inactivity time

Periodically connect (based on the

connection interval setting) to GSM

after power on.

Inactivity time is up Trunk

Remote host fail/remote

host recovered

Remote Ethernet host has failed. The

OnCell G3100 will keep pinging the

remote host over the Ethernet every 3

seconds after powering on. After failing

to connect 5 times in a row, the data

from the serial device will be sent

through the GSM connection.

When the remote

Ethernet host returns to

normal, data will revert

to being sent over

Ethernet after 5

continuous successful

pings.

Backup

Connection interval (default= 5 min): The time interval of the periodically connect function.

Ping remote host: Key in the IP address or Domain name of the remote host.

GPRS or GPRS/EDGE/UMTS/HSPA Operation Mode

TCP/IP compression (default=Disable): The setting of this field depend on whether or not the remote

user’s application requests compression.

Inactivity time (default=0 ms): This field specifies the idle time setting for auto-disconnection. A setting of

0 ms will cause the port to remain connected even if idle.

Link quality report (default=Disable): Setting this field to Enable allows the OnCell G3100 to disconnect a

connection if the link noise exceeds a certain threshold.