Moxa VPort 56-2MP-CAM10X-T [26/71] Reset to factory default

VPort 56-2MP System Configuration

4-8

NOTE

For the VPort 56

-2MP, the firmware file extension should be .rom.

Step 2:

Click on the

Upgrade button to upload the firmware to the VPort.

Step 3:

The system will start to

run the firmware upgrade process.

Step 4:

Once

Firmware Update Success…..Reboot.... is displayed, please wait a few seconds for the

VPort to reboot. The reboot process is finished once the

STAT LED is lit continuously in green.

NOTE

Upgrading the

firmware will not change the original settings.

Reset to Factory Default

From the “Reset to Factory Default” page, click on OK (as shown in the following figure) to reset the VPort to

its factory default settings.

NOTE

All parameters will be reset to factory defaults when you use the

Factory Default

function. For this reason, if

you want to keep a digital copy of the current configuration, remember to export the sys_config.ini file before

using the Factory Default functi

on.

Reboot

From the “Device Reboot” page, click OK (as shown in the following figure) to restart the VPort’s system.