Moxa VPort 56-2MP-CAM10X-T [54/71] Conditions

VPort 56-2MP System Configuration

4-36

Conditions

The administrator can set up DynaStream’s trigger conditions to facilitate automatic frame rate adjustment

(e.g., from Live to Alarm status).

Currently, there are three types of trigger conditions: Digital input, CGI Event, Motion Detection.

Setting Description Factory Default

Enable To enable or disable the DynaStream function. Disable

Duration This refers to the time period that DynaStream

is in operation.

For example, if the duration is set to 5 seconds, then the frame

rate will change from the Live to the Alarm status for the

duration of 5 seconds. After 5 seconds, the frame rate will

return to the Live status setting.

5 seconds

Trigger Channel To enable or disable the video channels. Disabled

Alarm

System Alarm

In addition to the LED indicators, a network disconnect alarm is provided by the VPort 56-2MP for notifying

system operators and the administrator. The video is stored on the SD card so that you can retrieve recorded

images after the network connection is restored.

NOTE

Refer to page 4

-5 of this manual for detailed configuration instructions on recording when the network is

disconnected.