Loewe Concept L42 [23/24] What to do when

23

What to do when ...

Problem Possible cause Remedy

No picture and no sound 1.) Power cable not plugged in.

2.) Power “OFF”

3.) Defective power cable

1.) Plug the power cable fi rmly into a socket.

2.) Switch power switch “ON”.

3.) Contact your Loewe service partner.

All menus appear in the wrong language Menu language set incorrectly.

1. Press

MENU

2.) No input signal, wrong input selected

2.) Check the connecting cable; assign the source unit to

the right input.

Weak or overrich colours 1.) Colour not set correctly

2.) Connecting cable not connected correctly

1.) Press

and set the colour.

2.) Connect the cable correctly.

The picture is cut off in the PC mode Picture position not set correctlyt Correct the picture position with the “Auto

adjust” function in the “AV6-PC RGB” menu.

The picture is too large or too small Image format set incorrectly

Press V+

Increase “Max. start-up volume” in the Sound menu.

Remote control not working properly The batteries of the remote control are used up Replace the old batteries with new ones..

Signal at V6 socket not displayed 1.) Set the phase position correctly.

2.) Check the setting of the picture width.

3.) Execute the “Auto adjust” function in the “AV6-PC

RGB” menu..

Horizontal stripes in TV or video signals Signal source placed in front of screen Place the signal source at the side of or behind the

screen.

Insuffi cient shielding of the video cable Only use high quality signal cables with high shield at-

3. Select the option “Call up the factory settings” with v

/ V and press OK.

The set switches automatically to standby 1.) Screen is too hot

2.) No standard input signal

1.) Improve the ventilation

2.) Standard signal at the input socket.