Makita 6319 DWFE [6/36] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Makita 6319 DWFE [6/36] English

Makita 6319 DWFE [6/36] English
6
ENGLISH
Explanation of general view
1Button
2 Battery cartridge
3Terminal cover
4 Charging light
5 Grip base
6Teeth
7 Side grip
8 Loosen
9 Tighten
10 Depth rod
11 Thumb screw
12 Sleeve
13 Bit
14 Bit holder
15 Switch trigger
16 Reversing switch lever
17 A side
18 B side
19 Clockwise
20 Counterclockwise
21 Low speed
22 High speed
23 Speed change lever
24 Action mode changing ring
25 Arrow
26 Adjusting ring
27 Graduations
28 Limit mark
29 Brush holder cap
30 Screwdriver
SPECIFICATIONS
Model BHP460
Capacities
Concrete ............................................................16 mm
Steel ..................................................................13 mm
Wood .................................................................38 mm
Wood screw ........................................ 10 mm x 90 mm
Machine screw ..................................................... 6 mm
No load speed (min
-1
)
High ............................................................... 0 – 1,500
Low ................................................................... 0 – 460
Blows per minute
High .............................................................0 – 22,500
Low ................................................................0 – 6,900
Overall length ..................................................... 267 mm
Net weight (with battery cartridge) ......................... 2.7 kg
Rated voltage ...................................................D.C. 24 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SAFETY INSTRUCTIONS
WARNING! When using battery operated tools basic
safety precautions, including the following, should
be followed to reduce the risk of fire, leaking batter-
ies and personal injury: Read these instructions
before operating this product and save these instruc-
tions.
For safe operation:
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider the work environment.
– Do not expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flammable
liquids or gases.
3. Keep children away
– Do not let visitors touch the tool. Keep visitors
away from work area.
4. Store batteries or idle tools
– When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
out of reach of children.
– Ensure that battery terminals cannot be shorted
by other metal parts such as screws, nails, etc.
5. Do not force the tool
– It will do the job better and safer at the rate for
which it was intended.
6. Use the right tool
– Do not force small tools or attachments to do the
job of a heavy duty tools. Do not use tools for pur-
poses not intended.
7. Dress properly
– Do not wear loose clothing or jewellery, they can
be caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear pro-
tecting hair covering to contain long hair.
8. Use protective equipment
– Use safety glasses and if the cutting operation is
dusty, a face or dust mask.
9. Connect dust extraction equipment
– If devices are provided for the connection of dust
extraction and collection ensure these are con-
nected and properly used.
10. Do not abuse the supply cord (if fitted)
– Never carry the tool by the cord or yank it to dis-
connect from the socket. Keep the cord away from
heat, oil and sharp edges.
11. Secure the work
– Use clamps or a vice to hold the work. It is safer
than using your hand and it frees both hands to
operate the tool.
12. Do not over-reach
– Keep proper footing and balance at all times.
13. Maintain tools with care
– Keep cutting tools sharp and clean for better and
safer performance. Follow instructions for lubrica-
tion and changing accessories. Inspect tool cords
periodically and if damaged have repaired by an
authorized service facility.
14. Disconnect tools
– Where the design permits, disconnect the tool
from its battery pack when not in use, before ser-
vicing and when changing accessories such as
blades, bits and cutters.
15. Remove adjusting keys and wrenches
– Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool
before turning it on.
16. Avoid unintentional starting
– Do not carry the tool with a finger on the switch.
17. Stay alert
– Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.

Содержание

Похожие устройства

Скачать