Home
Главная
Kemppi
Сварочная система
KempArc SYN 400
Техника безопасности Страница: 3

Kemppi KempArc SYN 400 [3/44] General electric safety

Safety Instructions

These instructions contain important information which either supplements or supersedes

other instruction relating to this product. Read these instructions carefully before

commencing operation.

Furthermore, the installation and use of the device must follow the instructions given in the

international standard: IEC 60974-9 Arc welding equipment – Part 9: Installation and use.

Use of personal protective equipment

• The arc and its reecting radiation damage unprotected eyes. Shield your eyes and

face appropriately before you start welding or observe welding. Also note the dierent

requirements for the darkness of the screen in the mask as the welding current changes.

• The arc radiation and spatters burn unprotected skin. Always wear protective gloves,

clothing and footwear when welding.

• Always wear hearing protection if the ambient noise level exceeds the allowable limit

(e.g., 85 dB).

General operating safety

• Exercise caution when handling parts heated in welding. For example, the tip of the

welding torch, the end of the welding rod and the work piece will heat to a burning

temperature.

• Never carry the device or suspend it by the carrying strap during welding.

• Do not expose the machine to high temperatures, as this may cause damage to the

machine.

• Keep the torch cable and earthing cable as close to each other as possible throughout

their length. Straighten any loops in the cables. This minimises your exposure to harmful

magnetic elds, which may interfere with a pacemaker, for example.

• Do not wrap the cables around the body.

• In environments classied as dangerous, only use S-marked welding devices with a safe

idle voltage level. These work environments include, for example, humid, hot or small

spaces where the user may be directly exposed to the surrounding conductive materials.

• Do not use arc welding equipment for pipe thawing.

Spatter and re safety

• Welding is always classied as hot work, so pay attention to re safety regulations during

welding and after it.

• Remember that re can break out from sparks even several hours after the welding work

is completed.

• Protect the environment from welding spatter. Remove ammable materials, such as

ammable uids, from the welding vicinity and supply the welding site with adequate re

ghting equipment.

• In special welding jobs, be prepared for hazards such as re or explosion when welding

container-type work pieces.

• Never direct the spark spray or cutting spray of a grinder toward the welding machine or

ammable materials.

• Beware of hot objects or spatter falling on the machine when working above the

machine.

• Welding in ammable or explosive sites is absolutely forbidden.

General electric safety

• Only connect the welding machine to an earthed electric network.

• Note the recommended mains fuse size.

• Do not take the welding machine inside a container, vehicle or similar work piece.

Kemppi KempArc SYN 400 [3/44] General electric safety

Содержание

Похожие устройства