Faber MIRROR WH BRS X/V A80 LOGIC [11/108] En 1 11

RECYCLING VERSION AIR OUTLET

To install the hood in recycling version, the optional charcoal

filter kit must be purchased.

• Remove the chimney angle bracket.

• Screw the filter cover onto the air outlet, using four screws 12c

(2.9 x 12.5).

• Fix the air outlet grid 8 on the recirculation air outlet using the

2 screws 12d (2,9 x 9,5) provided.

12c

12d

ELECTRICAL CONNECTION

• Connect the hood to the mains supply.

• Open the upper panel by pressing the A-key (See Part “USE” )

for at least 2 seconds.

• Remove the metal filters (See Part “MAINTENANCE”) and

make sure that the connector piece of the supply cable is cor-

rectly inside the hood socket.

Chimney assembly

Upper exhaust Chimney

• Slightly widen the two sides of the upper chimney and hook

them behind the brackets 7.2.1, making sure that they are well

seated.

• Secure the sides to the brackets using the 4 screws 12c (2,9 x

9,5) supplied.

Lower exhaust Chimney

• Slightly widen the two sides of the chimney and hook them

between the upper chimney and the wall, making sure that they

are well seated.

• Fix the lower part laterally to the hood body using the 2 screws

12c (2,9 x 9,5) supplied.

12c

2.1

2.2

7.2.1

12c