Ariete 4241 [19/38] Troubleshooting

-17-

TROUBLESHOOTING...

PROBLEM POSSIBLEREMEDY

General(forallfunctions)

The appliance will not start Make sure that the appliance is correctly plugged in and that the indicator

lights are off.

If the failure continues, contact an authorised repair service.

Vacuumcleaner(drysuction)

Dust is dispersed while it is being cleaned

up.

Make sure that the container and filter are correctly fitted.

Make sure that there is enough water in the container for dirty water.

VMake sure that the hose connector and/or attachments are not clogged

with dirt.

If they are, remove and clean them or rinse them with water.

Make sure that the motor filter or “Magic filter” are not dirty or incorrectly fitted.

Suction power is slowly weakening or is

inadequate

Make sure that the “Magic filter” and motor filters are not clogged and clean

them if necessary.

Check to make sure that the openings, suction hose or suction manifold are

not clogged with dirt.

If this is the case, move the hose during cleaning to free it of dirt and dust.

Adjust the power using the special dial.

Make sure that the mechanical suction control on the handgrip is closed and

if not, close the tab on the handgrip.

Wetanddrycleaning

Suction power suddenly drops Make sure that the dirty water container isn’t full. If this is not the case, empty

and clean it.

There is persistent and abnormal forma-

tion of foam in the dirty water container

Make sure to use original Ariete or a recommended detergent. Replace if

necessary.

No detergent is coming out although the

pump is on.

Make sure that there is enough detergent inside the water and detergent

container (T) and be sure to fill it if necessary.

Make sure that the spray nozzle is not clogged. If this is not the case, rinse it

under running water, being careful of the parts it contains.

If the problem persists after refilling with detergent or after cleaning, then

repeat the steps for first-time use.