Brita PURITY 600 Finest [40/190] Battery

Brita PURITY 600 Finest [40/190] Battery
38
10.3 Leak at Screwed Connections
Cause: Screwed connections not fi tted correctly.
Troubleshooting: Check mains pressure. Check all screwed connections and mount according to
Chapter 4.
If the fault continues, exchange fi lter system.
!
Caution: Prior to changing, read the Technical Data (Chapter 12) and the
Operating and Safety Information (Chapter 3).
10.4 Leak after Filter Replacement
Cause: O-ring at the fi lter cartridge is not seated correctly.
Troubleshooting: Check correct seat of the O-ring (Chapter 6.2).
!
Caution: Prior to dismantling read the data (Chapter 12) and the Operating
and Safety Information (Chapter 3).
10.5 No Display Function
Cause: Battery drained.
Troubleshooting: Replace display unit (Order number see Chapter 13).
Note: When replacing the display unit, follow the enclosed manual.
10.6 Data on Display Flashing
Cause: Monthly limit expired or the remaining capacity of the fi lter cartridge is
exhausted (Chapter 5.2).
Troubleshooting: Replace lter cartridge (Chapter 6).
10.7 Bypass setting in the display does not agree with the setting of the bypass screw
(cf. 10.8/10.9)
Cause: Filter was not commissioned correctly.
Troubleshooting: Flush fi lter again (Chapter 5.4). Check data in the display after fl ushing
(Chapter 5.5).
10.8 Bypass setting in the display does not agree with the setting of the bypass screw
(cf. 10.7/10.8)
Cause: Valve strip of the by-pass setting not set correctly.
Troubleshooting: Flush lter system again and readjust bypass screw (Chapter 5.3)
11 Battery
The installed battery is designed for a service life of approx. 10 years. The battery and display unit
must not be burnt and must not be disposed of in domestic waste.
To remove the battery, please proceed as follows:
Remove the screw on the back of the display unit and open and remove the back
of the housing.
Disconnect the soldered contacts on the battery with side cutters and remove the battery
from the bracket.
Replace the back of the housing on the display unit and tighten the screw.
Dispose of the battery and display unit following
the local environmental guidelines for battery disposal.

Содержание

Похожие устройства

Скачать