MCZ Forma 75 dx [23/40] Installation and assembly

6-INSTALLATION AND ASSEMBLY

IMPORTANT!

The closed replace must be installed and connected to the ue duct exclusively by a specialised technician, in order

for all local or national regulations to be complied with. Installation must in any case be in accordance with UNI

10683.

When the closed replace is unpacked, check that every part is in perfect working order and no damage has been caused during transport.

Any damage must immediately be reported to the carrier or dealer.

If the closed replace is installed in a place that is dicult to access, the weight can be reduced by removing the internal elements of the

rebox, but it is recommended to put all elements back in place properly and have this operation carried out exclusively by specialised

personnel.

The manufacturer declines all liability if the warning above is not complied with.

PREPARATION AND UNPACKING

Open the package, remove the closed replace from the pallet and set it in the pre-selected place, making sure this complies with the

requirements.

The closed replace must always remain in a VERTICAL position and handled solely with a cart. Do not drag the unit

which could suer damage to the support feet.

To remove the closed replace from the pallet act as follows:

• Remove plate A by removing the screws

• Remove the two screws from bracket B

One can then remove the 4 locking brackets "B", after having inserted the feet or wheels (supplied), raising them and tilting them slightly

to enable extraction. Pay particular attention to the door and its glass, protecting them from mechanical knocks that would compromise

their integrity.

Always handle the products with care. If possible, unpack the closed replace near the area

it will be installed in.

The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures are required.

Storage, disposal or any recycling is under the responsibility of the end user in compliance with the applicable laws in force.

BLOCKING PLATES AND BRACKETS

EXAMPLE OF CLOSED FIREPLACE PACKAGE