Hitachi C7U2NS [9/64] Specifications
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi C7U2NS [9/64] Specifications

Hitachi C7U2NS [9/64] Specifications
8
English
SPECIFICATIONS
*Be sure to check the nameplate on product as it is subject to change by areas.
Model C6U2 C6BU2 C7U2 C7BU2
Voltage (by areas)*
(110 V, 230 V)
Cutting Depth
90° 54 mm 66 mm
45° 39 mm 48 mm
Power
Input*
1100 W 1200 W
No-Load Speed
5500 min
-1
Weight (without cord) 3.5 kg 4.0 kg
STANDARD ACCESSORIES
(1) Saw Blade (mounted on tool ) ............................... 1
Dia. 165 mm .......... C6U2, C6BU2
Dia. 190 mm .......... C7U2, C7BU2
(2) Hex. bar wrench ....................................................... 1
(3) Guide .......................................................................... 1
(4) Wing-bolt ................................................................... 1
(5) Lever (short type) ..................................................... 1
(6) Dust collector ............................................................ 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
(1) Washer (A) ... for 16
mm (Hole dia. of saw blade)
... for 30 mm (Hole dia. of saw blade)
(2) Guide Rail Adapter (See Fig. 13)
Optional accessories are subject to change without notice.
APPLICATION
Cutting various types of wood.
ADDITIONAL SAFETY INSTRUCTIONS FOR
ALL SAWS WITH RIVING KNIFE
a) Use the appropriate riving knife for the blade being
used.
For the riving knife to work, it must be thicker than
the body of the blade but thinner than the tooth set of
the blade.
b) Adjust the riving knife as described in this instruction
manual.
Incorrect spacing, positioning and alignment can
make the riving knife ineffective in preventing
kickback.
c) Always use the riving knife except when plunge
cutting.
Riving knife must be replaced after plunge cutting.
Riving knife causes interference during plunge cutting
and can create kickback.
d) For the riving knife to work, it must be engaged in
the workpiece.
The riving knife is ineffective in preventing kickback
during short cuts.
e) Do not operate the saw if riving knife is bent.
Even a light interference can slow the closing rate of
a guard.
PRECAUTIONS ON USING CIRCULAR SAW
1. Do not use saw blades which are deformed or
cracked.
2. Do not use saw blades made of high speed steel.
3. Do not use saw blades which do not comply with
the characteristics specified in these instructions.
4. Do not stop the saw blades by lateral pressure
on the disc.
5. Always keep the saw blades sharp.
6. Ensure that the lower guard smoothly and freely.
7. Never use the circular saw with its lower guard
fixed in the open position.
8. Ensure that the retraction mechanism of the guard
system operates correctly.
9. The saw blades body must be thinner than the
riving knife and the width of cut, or kerf (with
teeth set) must be greater than the thickness of
the riving knife.
10. Never operate the circular saw with the saw blade
turned upward or to the side.
11. Ensure that the material is free of foreign matters
such as nails.
12. The riving knife should always be used except
when plunging in the middle of the workpiece.
13. For models C6U2 and C6BU2, the saw blades
range should be from 165 mm to 162 mm.
For models C7U2 and C7BU2, the saw blades
range should be from 190 mm to 185 mm.
14. For models C6BU2 and C7BU2, be careful of brake
kickback.
C6BU2 and C7BU2 models features an electric
brake that functions when the switch is released.
As there is some kickback when the brake
functions, be sure to hold the main body securely.
15. Sparks can sometimes appear caused by braking
operation when the switch is turned off since
C6BU2 and C7BU2 models employ electric brakes.
Be informed, however, that this phenomenon is
not a machine trouble.
16. For models C6BU2 and C7BU2, when the brake
becomes ineffective, replace the carbon brushes
with new ones.
17. Disconnect the plug from the receptacle before
carrying out any adjustment, servicing or
maintenance.
01Eng_C6U2_EE 11/5/08, 12:058

Содержание

Похожие устройства

English ADDITIONAL SAFETY INSTRUCTIONS FOR ALL SAWS WITH RIVING KNIFE a Use the appropriate riving knife for the blade being used For the riving knife to work it must be thicker than the body of the blade but thinner than the tooth set of the blade b Adjust the riving knife as described in this instruction manual Incorrect spacing positioning and alignment can make the riving knife ineffective in preventing kickback c Always use the riving knife except when plunge cutting Riving knife must be replaced after plunge cutting Riving knifecauses interference during plunge cutting and can create kickback d For the riving knife to work it must be engaged in the workpiece The riving knife is ineffective in preventing kickback during short cuts e Do not operate the saw if riving knife is bent Even a light interference can slow the closing rate of a guard PRECAUTIONS ON USING CIRCULAR SAW 1 Do not use saw blades which are deformed or cracked 2 Do not use saw blades made of high speed steel 3 Do not use saw blades which do not comply with the characteristics specified in these instructions 4 Do not stop the saw blades by lateral pressure on the disc 5 Always keep the saw blades sharp 6 Ensure that the lower guard smoothly and freely 7 Never use the circular saw with its lower guard fixed in the open position 8 Ensure that the retraction mechanism of the guard system operates correctly 9 The saw blades body must be thinner than the riving knife and the width of cut or kerf with teeth set must be greater than the thickness of the riving knife 10 Never operate the circular saw with the saw blade turned upward or to the side 11 Ensure that the material is free of foreign matters such as nails 12 The riving knife should always be used except when plunging in the middle of the workpiece 13 For models C6U2 and C6BU2 the saw blades range should be from 165 mm to 162 mm For models C7U2 and C7BU2 the saw blades range should be from 190 mm to 185 mm 14 For models C6BU2 and C7BU2 be careful of brake kickback C6BU2 and C7BU2 models features an electric brake that functions when the switch is released As there is some kickback when the brake functions be sure to hold the main body securely 15 Sparks can sometimes appear caused by braking operation when the switch is turned off since C6BU2 and C7BU2 models employ electric brakes Be informed however that this phenomenon is not a machine trouble 16 For models C6BU2 and C7BU2 when the brake becomes ineffective replace the carbon brushes with new ones 17 Disconnect the plug from the receptacle before carrying out any adjustment servicing or maintenance SPECIFICATIONS Model C6U2 I C6BU2 Voltage by areas Cutting Depth C7U2 1 C7BU2 110 V 230 V V 90 45 Power Input No Load Speed Weight without cord 54 mm 66 mm 48 mm 39 mm 1100 W 1200 W 5500 min1 3 5 kg 4 0 kg Be sure to check the nameplate on product as it is subject to change by areas STANDARD ACCESSORIES OPTIONAL ACCESSORIES sold separately 1 Saw Blade mounted on tool 1 I Dia 165 mm C6U2 C6BU2 I I Dia 190 mm C7U2 C7BU2 I 2 Hex bar wrench 1 3 Guide 1 4 Wing bolt 1 5 Lever short type 1 6 Dust collector 1 Standard accessories are subject to change without notice 1 Washer A for 16 mm Hole dia of saw blade for 30 mm Hole dia of saw blade 2 Guide Rail Adapter See Fig 13 Optional accessories are subject to change without notice APPLICATION Cutting various types of wood 8

Скачать